HOW TO reset Oil Life Maintenance Honda Fit Jazz 2007-2014

HOW TO reset Oil Life Maintenance Honda Fit Jazz 2007-2008-2009-2010-2011-2012-2013-2014 Year Model.

About this model:

The second generation Fit/Jazz debuted on October 17, 2007 at the Tokyo Motor Show. At its introduction in 2007, it won the Car of the Year Japan Award for the second time. The vehicle offered a longer wheelbase than its predecessor and is wider and longer overall. Overall height is unchanged, while interior height increased by .3 in. Multi-mode seating and cargo configurations were retained (US models were no longer capable of Refresh/Relax Mode until the following gen), with redesigned headrests enabling more convenient folding of the rear seats. The cabin featured greater interior volume, and boot capacity decreased from 21.3 to 20.6 cubic feet (0.58 m3).

Two engines were offered in the second generation Fit. A 1.3 L (79 cu in) i-VTEC produces 98 hp (73 kW) at 6,000 rpm and 98 lbf⋅ft (133 N⋅m) at 4,500 rpm. This engine was offered in both European and Asian markets. A 1.5 L (92 cu in) i-VTEC engine was also offered and produces a maximum output of 117 hp (87 kW) at 6,600 rpm and 106 lbf⋅ft (144 N⋅m) at 4,800 rpm.[44] This was the only engine available in the American market. A five-speed manual, five-speed automatic (4WD only) and CVT transmission were available.

The chassis was re-engineered, with structural rigidity increased by 164 percent over the first generation Fit.


HOW TO Reset the Oil Life Instruction


To Use Maintenance Minder

Displaying the Engine Oil Life

displaying maintenance minder

  1. Turn the ignition switch to ON.
  2. Press the reset knob (select/reset) knob repeatedly until the engine oil life appears on the information display.

The Maintenance Minder indicatoricon-wrench  ) stays on in the instrument panel after the engine oil life becomes 0%. Have the indicated maintenance done by a dealer immediately.


How to reset the oil maintenance display

Reset the engine oil life display if you have performed the maintenance service.

resetting maintenance display

  1. Turn the ignition switch to ON.
  2. Display the engine oil life by repeatedly pressing thereset knob (select/reset) knob.
  3. Press and hold the knob reset knobfor ten seconds or more.
  4. The engine oil life indicator and the maintenance item codes blink.
  5. Press the knobreset knob for five seconds or more.
  6. The displayed maintenance items disappear, and the engine oil life display returns to 100%.



Failure to reset the engine oil life after a maintenance service results in the system showing incorrect maintenance intervals, which can lead to serious mechanical problems.

The dealer will reset the engine oil life display after completing the required maintenance service. If someone other than a dealer performs maintenance service, reset the engine oil life display yourself.