Hummer H2 Change Engine Oil Service Light Reset
Quick and simple tutorial on how to reset the change engine oil service maintenance reminder indicator message light on Hummer H2 from the year 2003, 2004, 2005, 2006, 2007, 2008, 2009.
STEP 1
- Close all doors, gear to the park position.
STEP 2
- Turn the ignition on. Don’t start the engine.
STEP 3
- Immediately press the GAS PEDAL 3 TIMES (3X). The OIL LIFE RESET message flashes for 10 seconds, the system is resetting.
STEP 4
- Turn off the ignition. The Oil reset is complete.
FOR HUMMER H2 WITH THIS KIND OF STEERING WHEEL, PLEASE FOLLOW THE TUTORIAL BELOW.
STEP 1
- Close all doors, gear to the park position.
STEP 2
- Turn the ignition on. Don’t start the engine.
STEP 3
- Press the FUEL button until the ENGINE OIL LIFE is displayed.
STEP 4
- While the ENGINE OIL LIFE is displayed, press and hold the SELECT button until the OIL LIFE RESET message appears.
STEP 5
- Then release the SELECT button and the ENGINE OIL LIFE:100% will be displayed on the screen.
STEP 6
- Turn off the ignition. The Oil reset is complete.
NOTE: Always reset the engine oil life after an oil change.
About Hummer H2
The Hummer H2 is a large SUV that was marketed by Hummer and built in the AM General facility under contract from General Motors from 2002 to 2009. It is based on a modified GMT820 Chevrolet 2500 HD in front and 1500 frame in back. A four-door pickup truck version with a midgate that opens the vehicle’s interior to the external cargo bed was introduced for 2005 as the H2 SUT (sport utility truck).(source:wiki)
This tutorial is humbly made by Erwin Salarda. Thank you very much 🙂