Volvo XC90 2003-2013 Service Reminder Light Reset
Models 2001 & Earlier
The service reminder indicator (SRI) informs the driver that it is time for the car to be serviced. The lamp remains lit for 120 seconds when the ignition is switched on.
NOTE: If the lamp flashes, it may be because one of the service parameters has not been programmed.
1. Turn ignition to position I.
2. Press and hold in the reset button for the trip odometer.
3. Turn ignition to position II, while continuing to press trip odometer reset button.
4. The service reminder indicator (SRI) starts flashing when the reset button for the trip odometer has been pressed for 10 seconds.
5. Release the reset button for the trip odometer within 5 seconds. The instrument gives an audible signal when resetting has succeeded.
NOTE: If the trip meter reset button is not released within 5 seconds the indicator is not reset. However the indicator will stop flashing.
Models 2002 & Later
The service reminder indicator (SRI) informs the driver that it is time for the car to be serviced. The text message is displayed for 120 seconds each time the ignition is switched on.
1. Turn ignition to position I
2. Press and hold in the reset button for the trip odometer
3. Turn the key to position II within 2 seconds, while continuing to press trip odometer reset button.
4. For all vehicles from the 2003 model year a general yellow lamp will light when the reset button must be released.
5. Release the reset button for the trip odometer within 4 seconds. The instrument gives an audible signal when resetting has succeeded
NOTE: If the reset button for the trip odometer is not released within 4 seconds, the service reminder indicator (SRI) is not reset.
6. If the trip meter is already reset the reset button should be held in for a minimum of 10 seconds and a maximum of 14 seconds.
OR
NOTE: If equipped with a push button start/stop ignition, see PUSH BUTTON START/STOP IGNITION SWITCH POSITIONS for ignition switch positions.
The SRI lights the first time the ignition is switched on after the service interval has been reached. The SRI will continue to illuminate, and remain illuminated, for 2 minutes every time the ignition is switched on or until it is reset. The SRI can be programmed for distance traveled, time since last service and engine hours since last service. Programming is done using the Volvo factory scan tool.
Starting from the 2002 model year, the need for service is indicated partly by the lamp and partly by a text message, TIME FOR SERVICE or TIME FOR REGULAR SERVICE. The SRI can be reset using the Volvo factory scan tool (or equivalent aftermarket scan tool), or using the following method.
NOTE: The service indicator message can also be reset using VIDA vehicle communication.
The service reminder indicator (SRI) informs the driver that it is time for the vehicle to be serviced. The text message is displayed for 120 seconds each time the ignition is switched on.
1. Ignition position I
2. Press and hold in the reset button for the trip odometer.
3. Turn the key to position II within 2 seconds, while continuing to press trip odometer reset button.
4. Hold the reset button for the trip meter pressed in until the original value has been reset and the general yellow lamp comes on.
5. Release the reset button for the trip odometer within 4 seconds. The instrument gives an audible signal when resetting has succeeded.
NOTE: The odometer reset button must be released within 4 seconds to reset the service indication message.
6. If the trip meter is already reset, the reset button should be held in for a minimum of 10 seconds and a maximum of 14 seconds.