Volvo S40 2000-2011 Service Light Reset

Volvo S40 Service Light Reset

Volvo S40 2000-2001-2002-2003 Service Light Reset (Early production)

NOTE: The S40 information applies to early production 2004 cars. In mid-2004, Volvo introduced a redesigned S40. For early production cars, the 4th character of the VIN is V. For late production cars, the 4th character of the VIN is M. Early production S40 models are equipped with 1.9L 4-cylinder engines. Late production S40 models are equipped with 5-cylinder engines.

1. Turn ignition off.
2. Press and hold in the reset button for the trip odometer.
3. Turn ignition on, while continuing to press trip odometer reset button.
4. The service reminder indicator (SRI) starts flashing when the reset button for the trip odometer has been pressed for 10 seconds.
5. Release the reset button for the trip odometer within 4 seconds. The instrument gives an audible signal when the reset has succeeded. The SRI indicator lamp goes out.

NOTE: If the reset button for the trip odometer is not released within 4 seconds, the light is not reset. However, it will stop flashing.

Volvo S40 2004 Service Light Reset (Late production)

 NOTE: The S40 information applies to late production 2004 cars. In mid-2004, Volvo
introduced a redesigned S40. For early production cars, the 4th character of
the VIN is V. For late production cars, the 4th character of the VIN is M. Early
production S40 models are equipped with 1.9L 4-cylinder engines. Late
production S40 models are equipped with 5-cylinder engines.

1. Turn ignition to position I.
2. Press and hold the reset button for the trip odometer.
3. Turn key to position II within 2 seconds, while continuing to press trip odometer reset button.
4. Hold the reset button for the trip meter until the original value has been reset.
5. Release the reset button for the trip odometer within 4 seconds. The instrument cluster will give an audible signal when resetting is completed.

NOTE: If the reset button for the trip odometer will not released within 4 seconds, the light is not reset.

Volvo S40 2005- 2006- 2007- 008- 2009- 2010- 2011 Service Light Reset

NOTE: If equipped with a push-button start/stop ignition, see PUSH BUTTON START/STOP IGNITION SWITCH POSITIONS for ignition switch positions.

NOTE: The lamp can also be reset using VIDA (Volvo Diagnostic Scanner) vehicle communication.

The service reminder indicator (SRI) informs the driver that it is time for the vehicle to be serviced. The text message is displayed for 120 seconds each time the ignition is switched on.

1. Turn ignition to position I (ON.)
2. Press and hold in the reset button for the trip odometer.
3. Turn the key to position II within 2 seconds, while continuing to press trip odometer reset button.
4. Hold the reset button for the trip odometer pressed in until the original value has been reset.
5. The information lamp lights when the reset button must be released.
6. Release the reset button for the trip odometer within 4 seconds. The instrument gives an audible signal when resetting has succeeded. NOTE: If the reset button for the trip odometer is not released within 4seconds, the service reminder indicator (SRI) is not reset.

If the trip odometer is already reset, the reset button must be held in for a minimum of 10 seconds and a maximum of 14 seconds.