Volvo XC70 2003-2013 Service Reminder Light Reset

Volvo XC70 2003-2013 Service Light Reset

Volvo XC70 2003-2013 Service Reminder Light Reset

 

XC70 2003-2007 Service Reminder Reset

Models 2001 & Earlier

The service reminder indicator (SRI) informs the driver that it is time for the car to be serviced. The lamp remains lit for 120 seconds when the ignition is switched on.

NOTE: If the lamp flashes, it may be because one of the service parameters has not been programmed.

1. Turn ignition to position I.
2. Press and hold in the reset button for the trip odometer.
3. Turn ignition to position II, while continuing to press trip odometer reset button.
4. The service reminder indicator (SRI) starts flashing when the reset button for the trip odometer has been pressed for 10 seconds.
5. Release the reset button for the trip odometer within 5 seconds. The instrument gives an audible signal when resetting has succeeded.
NOTE: If the trip meter reset button is not released within 5 seconds the indicator is not reset. However the indicator will stop flashing.

Models 2002 & Later

The service reminder indicator (SRI) informs the driver that it is time for the car to be serviced. The text message is displayed for 120 seconds each time the ignition is switched on.
1. Turn ignition to position I
2. Press and hold in the reset button for the trip odometer
3. Turn the key to position II within 2 seconds, while continuing to press trip odometer reset button.
4. For all vehicles from the 2003 model year a general yellow lamp will light when the reset button must be released.
5. Release the reset button for the trip odometer within 4 seconds. The instrument gives an audible signal when resetting has succeeded
NOTE: If the reset button for the trip odometer is not released within 4 seconds, the service reminder indicator (SRI) is not reset.
6. If the trip meter is already reset the reset button should be held in for a minimum of 10 seconds and a maximum of 14 seconds.

 


XC70 2008-2005 Service Light Reset

NOTE: The service indicator message can also be reset using VIDA vehicle communication.

Analog Instrument Panel

1. Turn ignition switch to position I.
2. Press and hold the trip odometer reset button.
3. Turn ignition switch to position II, while continuing to press trip odometer reset button.
4. Wait for 10 seconds.
5. Release the reset button when the information lamp starts to flash.
6. The instrument panel beeps when resetting has been successful.

Digital Instrument Panel

1. Ignition switch position I.
2. Press and hold in the OK button on the end of left steering wheel stalk.
3. Ignition switch position II, while continuing to press OK button.
4. Wait for 10 seconds.
5. Release the button when the information light starts to flash.
6. The instrument beeps when resetting has been successful.