MAINTENANCE RESET: TOYOTA CAMRY

How to Reset the MAINT REQD Message on a Toyota Camry (Hybrid, L, LE, Se, XLE, XSE, XV30, XV40, XV50, XV70) from 2002-2003-2004-2005-2006-2007-2008-2009-2010-2011-2012-2013-2014-2015-2016-2017-2018-2019-2020).

2001-2012 Camry Maint Reqd Reset

STEP 1

• Turn ignition to the “RUN” position.

STEP 2

• Press the ODO/TRIP Button to Display TRIP A in the instrument Cluster.
• 

STEP 3

• Turn the KEY OFF.

STEP 4

• Press and hold the ODO/TRIP BUTTON knob and turn ignition to the “RUN/IGNITIO ON” position. Continue to hold the knob for at least 5 seconds until MAINT REQD flashes and the light is turned off.

STEP 5

• Turn ignition off.  Maint Reqd Reset is complete.

Oil Reset Toyota Camry Hybrid

STEP 1

• Press the “POWER” button once.

STEP 2

• Turn off hybrid system with trip meter “A” displayed.

STEP 3

• While holding the trip meter reset knob, press the “POWER” button once to turn power “ON”, “OIL MILEAGE RESET MODE” will be displayed. Continue to hold knob for at least 5 seconds until “COMPLETE is displayed and “OIL MILEAGE RESET MODE” turns off.

STEP 4

• Turn ignition off.

2012-2017 Camry Maintenance Required Reset

STEP 1

• Turn the ignition ON.
• If the MAINTENANCE REQUIRED popup, Press Back button on the DRIVER INFORMATION BUTTON.

STEP 2

• Then Press the PAGE BUTTON and Navigate to SETTINGS. Then Press OK (Center Button)

STEP 3

• Once you are in the SETTING use the ARROW BUTTON to navigate MAINTENANCE RESET. Then Press OK Button (Center Button)

STEP 4

• The confirmation message will appear. Select YES to Reset. Press OK button (Center Button) to confirm.

STEP 5

• Turn the Ignition OFF. Reset the maintenance reminder is complete.

2017-2020 Camry Maintenance Required Reset

STEP 1

• Turn the IGNITION ON. Don’t start the ENGINE.

STEP 2

• Press the ARROW BUTTON on Driver information button to navigate SETTING in Driver Information Display. Then Press OK BUTTON .

STEP 3

• Then use Down Arrow to Navigate VEHICLE SETTINGS. Then press OK BUTTON.

STEP 4

• Then Navigate to SCHEDULE MAINTENANCE. Then Press OK BUTTON.

STEP 5

• The Confirmation message will appear. RESET the DATA? Now Select YES then press OK BUTTON. The RESET  COMPLETE message will display.

STEP 6

• Turn Ignition OFF. MAINT REQD RESET is complete.

This tutorial will also work for the following car mode.

• Daihatsu Altis

Thank you very much! 🙂 -erwin