Ford Crown Victoria Engine Oil Change Soon Service Maintenance Message Light Reset

Ford Crown Victoria Engine Oil Change Soon Service Maintenance Message Light Reset

Quick and simple tutorial on how to reset the engine oil change soon reminder message indicator on Ford Crown Victoria from the year 1992, 1993, 1994, 1995, 1996, 1997. 1998. 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 and 2012.

STEP 1

  • Close all doors, gear to the park position.

STEP 2

  • Turn the ignition On. Don’t start the engine.

STEP 3

  • If the ENGINE OIL CHANGE SOON message appears on the screen, press the RESET button to clear the screen.Crown Victoria Oil Reset - Press reset button to dismiss the engine oil change soon message

STEP 4

  • Press the SETUP button until the SYSTEM CHECK is displayed, then press the SELECT button.Crown Victoria Oil Reset - press setup then select

STEP 5

  • The OIL LIFE will be displayed. If not displayed, press the SELECT button to navigate and select.Crown Victoria Oil Reset - OIL LIFE is displayed

STEP 6

  • While the OIL LIFE is displayed, press and hold the RESET button until the OIL LIFE is reset to 100%.Crown Victoria Oil Reset - press and hold the reset button to reset the oil life to 100%

STEP 7

  • Turn off the ignition. The oil reset is complete.

 

About Ford Crown Victoria

The Ford Crown Victoria is a full-size sedan that was marketed and manufactured by Ford. The successor to the Ford LTD Crown Victoria, two generations of the model line were produced from the 1992 to 2012 model years. The Ford counterpart of the Mercury Grand Marquis, the Crown Victoria was the largest sedan marketed by Ford in North America, slotted above the Ford Taurus. The Crown Victoria Police Interceptor (1992–2011) was marketed specifically for law-enforcement use; a long-wheelbase Crown Victoria sedan (2002–2011) was marketed primarily for taxi cab fleets.

The Crown Victoria was produced on the rear-wheel-drive Body-on-frame Ford Panther platform, sharing its chassis with the Grand Marquis and Lincoln Town Car. From 1997 until their 2011 discontinuation, the three model lines were the sole four-door sedans produced in North America with a full-length frame, rear-wheel drive, and a standard V8 engine. While front and rear crumple zones were engineered into the vehicle, it was one of Fords products that weren’t of unibody construction for the entire generation.

For its entire production, the Crown Victoria was produced by Ford Canada alongside the Grand Marquis at St. Thomas Assembly in Southwold, Ontario, Canada. From 1991 to 2011, over 1.5 million examples (including Police Interceptors) were produced by St. Thomas Assembly prior to its closure. A 2012 Crown Victoria (intended for Middle East export) was the final vehicle produced by the facility. Following the discontinuation of the model line, the Crown Victoria was not directly replaced, with the full-size Ford Taurus serving as the next basis for Ford police cars. (source:wiki)

 

THIS TUTORIAL HUMBLY MADE BY ERWIN SALARDA

By erwincsalarda

Hello, my name is Erwin Salarda, and I'm from the Philippines. My main interests are computers and automobiles, and I am very enthusiastic about learning new things in life. Everything on my website was created with the intention of sharing it with you.