2013-2020 Ford Escape Oil Life Reset
Ford Escape Oil Reset Method 1
Only reset the oil life monitoring system after changing the engine oil and oil filter.
To reset the oil life monitoring system do the following:
- Switch the ignition on. Do not start the engine.
- Fully press the accelerator and brake pedals at the same time.
- Keep the accelerator and brake pedals fully pressed.
- After three seconds, a message displays confirming the reset procedure is in progress.
- After 25 seconds, a message displays confirming the reset procedure is complete.
- Release the accelerator and brake pedals.
- Switch the ignition off.
If the above Tutorial is not applicable to your Model. Please follow the instruction Below.
Ford Escape Oil Reset Method 2
OIL CHANGE INDICATOR RESET
Use the information display controls on the steering wheel to reset the oil change indicator.
TURN TO KEY ON:
From the main menu scroll to:
Settings
- Press the right arrow button, then from this menu scroll to the following message.
Vehicle
- Press the right arrow button, then from this menu scroll to the following message.
Oil Life
- Press the right arrow button, then from this menu scroll to the following message.
Hold OK to Reset
- Press and hold the OK button until the instrument cluster displays the following message.
- Reset Successful When the oil change indicator resets the instrument cluster displays 100%. Remaining Life {00}% If the instrument cluster displays one of the following messages, (Not Reset
Reset Cancelled) repeat the process.
Thank you very much.