HOW TO GUIDE: Toyota Venza RKE Keyfob Programming

Toyota Venza RKE Keyfob Programming

Instructions on how to program the RKE Keyfob that comes standard on all 2009, 2010, 2011, 2012, 2013, 2014, and 2015 models of the Toyota Venza.

**THIS PROGRAMMING METHOD WILL NOT PROGRAM THE SMART KEY UNIT**

Key removed from the ignition.
Drivers door open, all other doors closed.
Insert key into ignition then remove it – do this twice.
Close and Open drivers door twice.
Insert the key into the Ignition then remove it.
Close and Open drivers door twice.
Close the door and Insert key into the ignition.
Turn ignition from off to on and back to off – once to add a new remote while retaining the original remotes, and twice to erase original remotes Remove the key from the ignition cylinder (Locks will cycle once for adding remote, and twice if erase mode was selected).
Press the Lock and Unlock Buttons on the remote at the same time for 1 second.
Press any button on the remote (Door locks will cycle once if programming is correct, and twice if unsuccessful).
To close procedure open drivers door and insert key into the ignition.

Key Removed from Ignition
Drivers Door open, all other doors closed
Insert key into ignition then remove it – do this twice
Close and open the drivers door twice
Insert key into the ignition then remove it
Close and open the drivers door twice
Insert the key into the ignition, then close the door
Turn the key from off to on – once to add a remote while retaining the original codes, or twice to rewrite the original remote codes (locks should cycle)
Press the Lock and Unlock buttons on the remote at the same time for 1 second
Press and hold any button on the remote for 2 seconds (locks should cycle once for correct programming, or twice if procedure is incomplete).
To close programming, open the door of the vehicle.

Thank you very much! This tutorial was compiled and researched by Erwin Salarda.