A Step-by-Step Guide to Programming Your Mazda 2 Remote Keyless Entry Fob
Tips and Tricks for Programming Your Mazda 2’s Remote Keyless Entry Fob. Tutorial on how to program the Mazda 2 RKE Remote Key less entry Fob programming from the year 2011, 2012, 2013 to 2014. Please follow the instruction below.
Mazda 2 Flip Key Fob Remote – Remote Portion Programming
- Prepare Vehicle – Step 1
REMOVE key from Ignition.
- Prepare Vehicle – Step 2
CLOSE ALL doors.
- Prepare Vehicle – Step 3
OPEN Driver’s side door and LEAVE OPEN.
- Enter Programming Mode – Step 1
WITHIN 24 seconds, PERFORM the following steps:
a. INSERT key into Ignition.
b. TURN to the ON position (just shy of cranking) and back to the OFF position.
c. TURN to the ON position (just shy of cranking) and back to the OFF position.
d. TURN to the ON position (just shy of cranking) and back to the OFF position.
e. CLOSE Driver’s side door and OPEN.
f. CLOSE Driver’s side door and OPEN.
g. CLOSE Driver’s side door and OPEN.
- Enter Programming Mode – Step 2
Vehicle will cycle door locks LOCK/UNLOCK signaling that the vehicle has successfully entered Programming Mode.
- Program Remote – Step 1
PRESS the UNLOCK button on the first remote to be programmed 2 times. Vehicle will cycle door locks LOCK/UNLOCK signaling that the remote has been successfully programmed.
- Program Additional Remotes
REPEAT Step 6 for ALL remotes you want to use with your vehicle. If you only have 1 remote, REPEAT Step 7 2 additional times. If you have 2 remotes, REPEAT Step 7 with the 2nd remote 2 times.
- Finalize & Exit Programming Mode
CLOSE and OPEN Driver’s side door 1 time to finalize the programming procedure and EXIT Programming Mode. Door locks will cycle LOCK/UNLOCK to confirm.
- Test Remotes
TEST all remotes. Programming is now complete.
Mazda 2 Flip Key Fob Remote – Key Portion Programming
- Enter Programming Mode – Step 1
INSERT first programmed transponder key into the Ignition and TURN to the ON position. LEAVE key in Ignition in ON position for approximately 1 second UNTIL the RED security light on the dashboard instrument cluster goes OFF, then REMOVE key from Ignition.
- Enter Programming Mode – Step 2
WITHIN 5 seconds, INSERT second programmed transponder key into the Ignition and TURN to the ON position. The RED key symbol light will ILLUMINATE and go OFF.
- Program Remote
WITHIN 10 seconds, INSERT the new key into the Ignition and TURN to the ON position. The RED security light will ILLUMINATE and go OFF.
- Exit Programming Mode
REMOVE key from Ignition to EXIT Programming Mode.
- Test Remotes
TEST all remotes. Programming is now complete.
- Share
If these programming instructions helped save you time and money, please consider sharing our website with friends and family so they can do the same.
Programming Notes:
- Verify the following prior to following these instructions:
- Your vehicle is equipped with keyless entry, and
- You have a key fob remote that is compatible with your vehicle.
- Obtain ALL remote transmitters for this vehicle.
- You MAY program up to 3 remotes to your vehicle.
- Flip key(s) MUST be cut in order to program it to your vehicle.
- You MUST have 2 previously programmed transponder keys in order to program a new key portion of your flip key.
I really hope that this tutorial will be of use to you when it comes to programming the key fob for your Mazda 2.How to Program the Remote Keyless Entry Fob on Your Mazda 2. Instructions for programming Mazda 2 RKE remote keyless entry fobs from 2011 to 2014. Please do as stated above.
TAGS:
Make the Most of Your Mazda 2 Keyless Entry Fob With These Programming Tips, Mazda 2 Keyless Entry Fob Programming: A Step-by-Step Guide, Mazda 2 Keyless Entry Fob Programming: Tips and Tricks, Quick and Easy Instructions for Programming Your Mazda 2 Remote Keyless Entry Fob, The Easiest Way to Program Your Mazda 2 Keyless Entry Fob, Tips and Tricks for Programming Your Mazda 2’s Remote Keyless Entry Fob