How to Program Your Mazda 3 Key Fob in Less Than 5 Minutes
A Step-by-Step Guide to Programming Your Mazda 3 RKE Keyfob. A tutorial will help you to program the remote keyless entry keyfob on Mazda3 from the years 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, and 2013. Please follow the tutorial below for your reference.<>
Mazda 3 2004-2008 Key Fob Programming
<>
- Prepare Vehicle – Step 1
REMOVE key from Ignition.<>
- Prepare Vehicle – Step 2
CLOSE ALL doors.<>
- Prepare Vehicle – Step 3
OPEN Driver’s side door and LEAVE OPEN.<>
- Enter Programming Mode – Step 1
REPEAT the following steps 3 times:<>
a. INSERT key into Ignition and TURN to the ON position (just shy of cranking) and back to the OFF position.<>
b. REMOVE key from Ignition.<>
- Enter Programming Mode – Step 2
CLOSE and OPEN Driver’s door 3 times.<>
- Enter Programming Mode – Step 3
Vehicle will cycle door locks LOCK/UNLOCK signaling that the vehicle has successfully entered Programming Mode.<>
- Program Remote
PRESS ANY button on the first remote to be programmed 2 times. Vehicle will cycle door locks LOCK/UNLOCK signaling that the remote has been successfully programmed.<>
- Program Additional Remotes
REPEAT Step 7 for ALL remotes you want to use with your vehicle.<>
- Exit Programming Mode
PRESS ANY button AGAIN on the last remote that was programmed to EXIT Programming Mode.<>
- Finalize Programming
WAIT 15 seconds for the vehicle to cycle locks LOCK/UNLOCK indicating finalization of programming procedure.<>
- Test Remotes
TEST all remotes. Programming is now complete.<>
Programming Notes:<>
- Verify the following prior to following these instructions:
- Your vehicle is equipped with keyless entry, and
- You have a key fob remote that is compatible with your vehicle.
- Obtain ALL remote transmitters for this vehicle.
- You may program up to 3 remotes to your vehicle.
2009-2013 MAZDA 3 KEY FOB PROGRAMMING
<>
Flip Key Fob Remote – Remote Portion Programming
- Prepare Vehicle – Step 1
REMOVE key from Ignition.<>
- Prepare Vehicle – Step 2
CLOSE ALL doors.<>
- Prepare Vehicle – Step 3
OPEN Driver’s side door and LEAVE OPEN.<>
- Enter Programming Mode – Step 1
WITHIN 24 seconds, PERFORM the following steps:<>
a. INSERT key into Ignition.<>
b. TURN to the ON position (just shy of cranking) and back to the OFF position.<>
c. TURN to the ON position (just shy of cranking) and back to the OFF position.<>
d. TURN to the ON position (just shy of cranking) and back to the OFF position.<>
e. CLOSE Driver’s side door and OPEN.<>
f. CLOSE Driver’s side door and OPEN.<>
g. CLOSE Driver’s side door and OPEN.
- Enter Programming Mode – Step 2
Vehicle will cycle door locks LOCK/UNLOCK signaling that the vehicle has successfully entered Programming Mode.<>
- Program Remote – Step 1
PRESS the UNLOCK button on the first remote to be programmed 2 times. Vehicle will cycle door locks LOCK/UNLOCK signaling that the remote has been successfully programmed.<>
- Program Additional Remotes
REPEAT Step 6 for ALL remotes you want to use with your vehicle. If you only have 1 remote, REPEAT Step 7 2 additional times. If you have 2 remotes, REPEAT Step 7 with the 2nd remote 2 times.<>
- Finalize & Exit Programming Mode
CLOSE and OPEN Driver’s side door 1 time to finalize the programming procedure and EXIT Programming Mode. Door locks will cycle LOCK/UNLOCK to confirm.<>
- Test Remotes
TEST all remotes. Programming is now complete.<>
Flip Key Fob Remote – Key Portion Programming
- Enter Programming Mode – Step 1
INSERT first programmed transponder key into the Ignition and TURN to the ON position. LEAVE key in Ignition in ON position for approximately 1 second UNTIL the RED security light on the dashboard instrument cluster goes OFF, then REMOVE key from Ignition.<>
- Enter Programming Mode – Step 2
WITHIN 5 seconds, INSERT second programmed transponder key into the Ignition and TURN to the ON position. The RED key symbol light will ILLUMINATE and go OFF.<>
- Program Remote
WITHIN 10 seconds, INSERT the new key into the Ignition and TURN to the ON position. The RED security light will ILLUMINATE and go OFF.<>
- Exit Programming Mode
REMOVE key from Ignition to EXIT Programming Mode.<>
- Test Remotes
TEST all remotes. Programming is now complete.<>
- Share
If these programming instructions helped save you time and money, please consider sharing our website with friends and family so they can do the same.<>
Programming Notes:<>
- Verify the following prior to following these instructions:
- Your vehicle is equipped with keyless entry, and
- You have a key fob remote that is compatible with your vehicle.
- Obtain ALL remote transmitters for this vehicle.
- You MAY program up to 3 remotes to your vehicle.
- Flip key(s) MUST be cut in order to program it to your vehicle.
- You MUST have 2 previously programmed transponder keys in order to program a new key portion of your flip key.
This guide was written in the hopes that it will assist you in programming the keyless entry remote for your Mazda3. Instructions for Setting Up the Mazda 3 RKE Keyless Remote. Mazda3 owners of the 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, and 2013 model years may use this guide to learn how to program the remote keyless entry keyfob.<>
Thank you very much! This tutorial was compiled and researched with LOVE by Erwin Salarda.
TAGS:<>
How to Program Your Mazda 3 RKE Keyfob, A Step-by-Step Guide to Mazda 3 RKE Keyfob Programming, Programming Your Mazda 3 RKE Keyfob: A Tutorial, How to Program Your Mazda 3 Remote Keyless Entry Keyfob, A Simple Tutorial for Programming Your Mazda 3 Keyfob, How to Easily Program Your Mazda 3 RKE Keyfob, A Step-by-Step Guide to Programming Your Mazda 3 RKE Keyfob, How to Program Your Mazda 3 RKE Keyfob in Less Than 5 Minutes, The Quick and Easy Guide to Mazda 3 RKE Keyfob Programming, Mazda 3 RKE Keyfob Programming: A Simple How-to Guide, How to Program Your Mazda 3 RKE Keyfob Like a Pro, The Ultimate Guide to Mazda 3 RKE Keyfob Programming.<>