Ford Flex TPMS Reset

FORD FLEX TPMS RESET

HOW TO RESET THE TPMS ON FORD FLEX FROM YEAR 2009-2010-2011-2012-2013-2014-2015-2016-2017-2018.

About Ford Flex:

The Ford Flex is a full-size crossover SUV manufactured by the Ford Motor Company since the 2009 model year. The Flex supersedes the Ford Taurus X and Freestyle, sharing their drivetrains and using an updated platform.

The Flex is manufactured alongside the Ford Edge and Lincoln MKX mid-size CUVs at the Oakville Assembly plant in Oakville, Ontario, where the first Flex was manufactured at the beginning of June 2008.

The Flex is directly related to a group of rebadged variants, Ford’s Chicago D4’s, so called for the plant where they were manufactured (Oakville Assembly) and the platform (D4) they share: the Ford Explorer and Lincoln MKT. The Flex is closely related to Ford’s Chicago D3’s: the Mercury Montego and third generation Mercury Sable sedans; the Ford Freestyle/Ford Taurus X wagons, marketed as a crossover vehicles; as well as the fifth and sixth generations Ford Taurus and Lincoln MKS.

Noted for styling by Peter Horbury that recalls the MINI, and a series of horizontal grooves in its doors and tailgate evoking a Woodie, the Flex is marketed in the United States, in Canada and in the Middle East.

TPMS RESET

Note: Your need TPMS Scan tool for this car model.

Relearn Procedure for Models WITH STANDARD IGNITION.

  1. Inflate all tires to pressure listed on vehicleplacard.
  2. Turn ignition to OFF position and press and release brake pedal.
  3. Cycle ignition from the OFF to RUN position 3 times, ending in the RUN position.
  4. Press and release brake pedal.
  5. Turn ignition to OFF position.
  6. Cycle ignition from the OFF to RUN position 3 times, ending in the RUN position.
  7. Horn will sound once,and the TPMS telltale will blink once, indicating train mode is initiated. If equipped with a message center, it will display TRAIN LF TIRE.
  8. .Starting with the LF tire, use your TPMS scan tool to scan each sensor in the following order: LF, RF, RR, LR (and full size spare if equipped). The horn will sound once each sensor has been recognized.
  9. After training LR tire, the message center will display TRAINING MODE COMPLETE. If the vehicle is not equipped with the message center display, successful completion can be verified by turning the ignition to the OFF position and not hearing the horn sound. If the horn sounds, then the training procedure must be repeated.
  10. Turn ignition to the OFF position.

 

 

Relearn Procedure for Models WITH PUSH-BUTTON IGNITION.

  1. Inflate all tires to pressure listed on vehicle placard.2.With the
  2. vehicle off, press and release the brake pedal.
  3. Press,and hold,the START button until a chime sounds.
  4. Power OFF by pushing the button 1 time.
  5. Press,and hold, the S TART button until a chime sounds.
  6. Power OFF by pushing the button 1 time.
  7. Press,and hold, the START button until a chime sounds.
  8. Press and release the brake pedal.
  9. Power OFF by pushing the button 1 time.
  10. Press,and hold, theS TART button until a chime sounds.
  11. Power OFF by pushing the button 1 time.
  12. Press,and hold, the START button until a chime sounds.
  13. Power off by pushing the button 1 time.
  14. Press,and hold, the START button until a chime sounds.
  15. Horn will sound once,and the TPMS telltale will blink once, indicating train mode is initiated. If equipped with a message center, it will display TRAIN LF TIRE.
  16. Starting with the LF tire, use your TPMS scan tool to scan each sensor in the following order: LF, RF, RR, LR (and full size spare if equipped). The horn will sound once each sensor has been recognized.
  17. After training LR tire, the message center will display TRAINING MODE COMPLETE. If the vehicle is not equipped with the message center display, successful completion can be verified by turning the ignition to the OFF position and not hearing the horn sound. If the horn sounds, then the training procedure must be repeated.
  18. 18.Turn ignition to the OFF position.

 

Thank you very much!

By erwincsalarda

Hello, my name is Erwin Salarda, and I'm from the Philippines. My main interests are computers and automobiles, and I am very enthusiastic about learning new things in life. Everything on my website was created with the intention of sharing it with you.