Ford C-Max TPMS Reset

HOW TO: Ford C-Max 2013-2018 TPMS Reset /Relearn

by

FORD C-MAX TPMS RESET

How to reset the TPMS (Tire Pressure Monitoring System in Ford C-Max From Year 2013-2014-2015-2016-2017-2018.

About Ford C-Max

The Ford C-Max (stylized as Ford C-MAX and previously called the Ford Focus C-Max) is a compact multi-purpose vehicle (MPV) produced by the Ford Motor Company since 2003. The Ford Grand C-Max has a longer wheelbase.

Ford introduced the C-Max in the United States as its first hybrid-only line of vehicles, which includes the C-Max Hybrid, released in September 2012, and the C-Max Energi plug-in hybrid, launched in October 2012. Although the C-Max was initially available only in Europe, the first generation was partially available in New Zealand. With the introduction of the new large MPVs S-Max and Galaxy, the C-Max is now the mid-sized multi-purpose vehicle in Ford’s lineup, above the now discontinued B-Max. (source wikipedia)

TPMS RESET

Note: Your need TPMS Scan tool for this car model.

Relearn Procedure for Models WITH STANDARD IGNITION.

  1. Inflate all tires to pressure listed on vehicleplacard.
  2. Turn ignition to OFF position and press and release brake pedal.
  3. Cycle ignition from the OFF to RUN position 3 times, ending in the RUN position.
  4. Press and release brake pedal.
  5. Turn ignition to OFF position.
  6. Cycle ignition from the OFF to RUN position 3 times, ending in the RUN position.
  7. Horn will sound once,and the TPMS telltale will blink once, indicating train mode is initiated. If equipped with a message center, it will display TRAIN LF TIRE.
  8. .Starting with the LF tire, use your TPMS scan tool to scan each sensor in the following order: LF, RF, RR, LR (and full size spare if equipped). The horn will sound once each sensor has been recognized.
  9. After training LR tire, the message center will display TRAINING MODE COMPLETE. If the vehicle is not equipped with the message center display, successful completion can be verified by turning the ignition to the OFF position and not hearing the horn sound. If the horn sounds, then the training procedure must be repeated.
  10. Turn ignition to the OFF position.

 

 

Relearn Procedure for Models WITH PUSH-BUTTON IGNITION.

  1. Inflate all tires to pressure listed on vehicle placard.2.With the
  2. vehicle off, press and release the brake pedal.
  3. Press,and hold,the START button until a chime sounds.
  4. Power OFF by pushing the button 1 time.
  5. Press,and hold, the S TART button until a chime sounds.
  6. Power OFF by pushing the button 1 time.
  7. Press,and hold, the START button until a chime sounds.
  8. Press and release the brake pedal.
  9. Power OFF by pushing the button 1 time.
  10. Press,and hold, theS TART button until a chime sounds.
  11. Power OFF by pushing the button 1 time.
  12. Press,and hold, the START button until a chime sounds.
  13. Power off by pushing the button 1 time.
  14. Press,and hold, the START button until a chime sounds.
  15. Horn will sound once,and the TPMS telltale will blink once, indicating train mode is initiated. If equipped with a message center, it will display TRAIN LF TIRE.
  16. Starting with the LF tire, use your TPMS scan tool to scan each sensor in the following order: LF, RF, RR, LR (and full size spare if equipped). The horn will sound once each sensor has been recognized.
  17. After training LR tire, the message center will display TRAINING MODE COMPLETE. If the vehicle is not equipped with the message center display, successful completion can be verified by turning the ignition to the OFF position and not hearing the horn sound. If the horn sounds, then the training procedure must be repeated.
  18. 18.Turn ignition to the OFF position.

 

Thank you very much!