Dodge TPMS Reset

Dodge TPMS Reset / Relearn Instruction Guide

by

DODGE TPMS RESET

How to Reset a Tire Pressure (TPMS) Light on Dodge Cars.

 

 TPMS RESET INSTRUCTION 1

No special tools are required to perform this procedure, however a properly formatted TPMS scan tool may expedite the relearn process Sensor

Relearn Procedure without a Scan Tool:

1. Inflate all tires to the pre ssure listed on the placard.
2. Drive the vehicle for at least 15 minutes at a speed of 30 MPH or more for the system to learn new sensor IDs. Note: Vehicle may need to sit ( engine off) for up to 20 minutes before driving.

Sensor Relearn Procedure with a Scan Tool:

1.Inflate all tires to the pre ssure listed on the placard.
2. Starting with the LF tire, use a properly formatted scan tool t o scan each sensor in the following order: LF, RF, RR, LR (and ful l size spare if equipped).
3. Turn ignition to the ON position.
4. Connect the scan tool to the vehi cle’s OBDII Port and upload th e sensor ID’s.
5. Turn the ignition to the OFF position.

 

TPMS RESET INSTRUCTION 2

 

No special tools are required to perform this relearn procedure , however a properly formatted TPMS scan tool may expedite the relearn process .

Sensor Relearn Procedure without a Scan Tool:

1. Inflate all t ires to pressure listed on the placard.
2. Let the vehicle sit OFF for a minimum of 20 minutes
3. Drive the vehicle above 15 MPH for at least 10 minutes. The relearn may take from 10 – 35 minutes of driving . The vehicle will learn each sensor Id and turn the TPMS light off .

 

TPMS RESET INSTRUCTION 3

 

Dealer aRelearn Currently, only the Original Equi pment (OE) Dealership has the scan tool necessary to register new sensor IDs.