Manatec Genie On Lift 3D Wheel Aligner
Tawag lang paps! 0915 568 4578 For pricelist: CLICK HERE
LIBRE AND INSTALLATION UG TRAINING BAI!
FEATURED OF GENIE 3D WHEEL ALIGNER
- World’s 1st In-lift 3D Wheel Aligner with 2 cameras & smallest targets.
- World’s smallest target plates for front wheels.
- No fixed beam / column in front of the lift.
- No obstruction of signals due to technician walking around.
- Measurement at floor level.
- Adjustment at any convenient height, No height restrictions.
- Genie 3D Elite can be installed in 11′ X 19′ space.
- No need for minimum distance between Wall and the lift.
- Free space in the shop floor can be effectively utilized.
- Exclusive software takes care of automatic lift level compensation.
- Genie is a creatively designed module that houses Hi-definition cameras and electronics to capture images of the targets on wheels.
- Each Genie has 1 camera, making Genie 3D Elite the only aligner in the world using just 2 cameras for an in-lift model.
- Camera not required to be removed & refitted every time.
- Cost-effective design
ACCURACY AND TECHNICAL SPECIFICATION
| Measurement Paraments | Range | Accuracy |
| Camber (Front / Rear) | ± 15° 00′ | ± 00° 02′ |
| Caster | ± 28° 00′ | ± 00° 02′ |
| Kingpin Inclination | ± 25° 00′ | ± 00° 05′ |
| Teo (Front/Rear) | ± 20° 00′ | ± 00° 01′ |
| Total Toe | ± 40° 00′ | ± 00° 02′ |
| Toe Out on Turns | ± 25° 00′ | ± 00° 02′ |
| Setback (Front / Rear ) | ± 25 mm | ± 1 mm |
| Thrust Angle | ± 05° 00′ | ± 00° 01′ |
| Runout | ± 10° 00′ | ± 00° 02′ |
| Included Angle | ± 40° 00′ | ± 00° 05′ |
| Track width difference | ± 300 mm | ± 5 mm |
| Power Supply (wheel Aligner) | 230V AC, 50Hz / 110V AC, 60Hz | |
| Power Supply (Lift) | 380V AC, 3 Phase, 50Hz / | |
| 220V AC, 3 Phase, 60Hz | ||
| Power consumption | 250 W | |
| Operating temperature | 0°-50°C | |
WATCH VIDEO FOR MORE INFORMATION OF THIS WHEEL ALIGNER
World’s 1st In-lift 3D Wheel Aligner with 2 cameras & smallest targets
