Suzuki Transmission Relearn Guide

TCM Initialization Procedure

When one or more operations such as shown below are performed, all learned contents which are stored in TCM memory should be erased after the operations.

When A/T H/W is replaced in a vehicle.
When a used TCU is installed in other vehicle.
When a vehicle condition is unstable (engine RPM flare, TPS toggling and so on; at this kind of unstable conditions, mis-adaptation might be done).

Connect the scan tool with a DLC connector in a vehicle.

Turn ignition switch ON.
Turn the power on for the scan tool.
Follow the “TCM LEARNED INITIALIZE” procedure on the scan tool menu.

NOTE: Before pushing “Yes” Button for TCM initialization on the scan tool screen, make sure that the condition is as follows:

Condition:

Engine idle.
Select lever set “P” range.

This Tutorial may work for the following Car model.

Maruti Suzuki S-Presso
Suzuki Aerio
Suzuki Alto
Suzuki APV
Suzuki Baleno
Suzuki Baleno (2015)
Suzuki Cappuccino
Suzuki Cara
Suzuki Carry
Suzuki Celerio
Suzuki Cervo
Suzuki Cultus
Suzuki Cultus Crescent
Suzuki CV1
Suzuki Equator
Suzuki Ertiga
Suzuki Escudo
Suzuki Esteem
Suzuki Farm Worker
Suzuki Forenza
Suzuki Fronte
Suzuki Fronte 800
Suzuki Fun
Suzuki Grand Vitara
Suzuki GSX-R/4
Suzuki Hatch
Suzuki Hustler
Suzuki Ignis
Suzuki Jimny
Suzuki Kei
Suzuki Kizashi
Suzuki Landy
Suzuki Lapin
Suzuki Liana
Suzuki LJ80
Suzuki Mehran
Suzuki Mighty Boy
Suzuki MR Wagon
Suzuki Nomade
Suzuki Palette
Suzuki Reno
Suzuki Samurai
Suzuki Santana
Suzuki SC100
Suzuki Sidekick
Suzuki Sierra
Suzuki Solio
Suzuki Spacia
Suzuki Splash
Suzuki Suzulight
Suzuki Swift
Suzuki Swift+
Suzuki SX4
Suzuki SX4 S-Cross
Suzuki Twin
Suzuki Vitara
Suzuki Wagon R
Suzuki X-90
Suzuki X-HEAD
Suzuki XL-7