Step-by-Step TPMS Reset for 2021-2023 Ford Maverick Models
The Tire Pressure Monitoring System (TPMS) is a crucial safety feature in modern vehicles, including the Ford Maverick. It helps drivers maintain proper tire pressure, which is essential for optimal vehicle performance, fuel efficiency, and safety. In this comprehensive guide, we’ll explore how to reset and relearn the TPMS for all generations of the Ford Maverick.<>
Understanding TPMS in Ford Maverick
The Ford Maverick, introduced in 2021, comes equipped with a sophisticated TPMS that continuously monitors the air pressure in all four tires. This system alerts the driver when one or more tires are significantly under-inflated, potentially preventing accidents and improving fuel economy.<>
When to Reset or Relearn TPMS
There are several situations when you might need to reset or relearn your Ford Maverick’s TPMS:<>
- After rotating your tires
- When replacing one or more tires
- After installing new TPMS sensors
- If you’ve recently adjusted tire pressures
- When the TPMS warning light remains on after inflating tires to the correct pressure
TPMS Reset Procedure for 2021-2023 Ford Maverick
For the latest generation of Ford Maverick (2021-2023), follow these steps to reset the TPMS:<>
- Turn on the ignition without starting the engine.
- Locate the TPMS reset button. It’s usually on the dashboard or center console, labeled as “TPMS,” “Set,” or “Reset.”
- Press and hold the TPMS reset button until the TPMS light blinks twice.
- Release the button and wait for the TPMS light to turn off (this may take a few seconds).
- Start the engine and wait a few minutes for the TPMS system to reinitialize.
- Drive the vehicle at least 20 mph for several minutes to allow the TPMS system to recalibrate.
- Check the tire pressure again and adjust if necessary.
TPMS Relearn Procedure for 2021-2023 Ford Maverick
If resetting doesn’t solve the issue or you’ve installed new TPMS sensors, you may need to perform a relearn procedure:<>
- Turn the ignition key to the “Off” position.
- Press and hold the TPMS reset button until the TPMS indicator light blinks slowly three times, then release.
- Turn the ignition to the “On” position without starting the engine.
- The horn will sound once, and a message will appear in the information display indicating the train mode is active.
- Starting with the left front tire, use a TPMS tool to activate the TPMS sensor. The horn will beep once to confirm the sensor has been recognized.
- Repeat this process for the right front, right rear, and left rear tires in that order.
- After the last tire has been trained, the message “Training Complete” will display on the dashboard.
Using a TPMS Tool
For the relearn procedure, you’ll need a TPMS tool. While Ford dealerships use a specific Ford tool, aftermarket universal TPMS tools are available and work well for most vehicles, including the Ford Maverick.<>
Troubleshooting TPMS Issues
If you encounter problems during the reset or relearn process:<>
- Ensure all tires are properly inflated to the recommended pressure.
- Check that the TPMS sensors are functioning correctly. Faulty sensors may need replacement.
- If the TPMS light continues to stay on, there may be an issue with the system. Consider having your vehicle checked by a certified Ford technician.
Maintaining Your Ford Maverick’s TPMS
To keep your TPMS functioning optimally:<>
- Regularly check tire pressures, including the spare tire.
- Replace faulty or damaged sensors promptly.
- Be aware that TPMS sensors have batteries that may need replacement over time. Consult your owner’s manual or a qualified technician for the recommended replacement interval.
TPMS in Earlier Ford Maverick Models
It’s worth noting that the original Ford Maverick, produced from 1970 to 1977, did not come equipped with TPMS technology. TPMS became widely adopted in automobiles in the late 1990s and early 2000s. Therefore, the procedures described in this article apply specifically to the modern Ford Maverick introduced in 2021.<>
The Importance of Proper Tire Pressure
Maintaining correct tire pressure is crucial for several reasons:<>
- Safety: Properly inflated tires provide better handling and reduce the risk of blowouts.
- Fuel Efficiency: Correct tire pressure can improve fuel economy by up to 3%.
- Tire Longevity: Proper inflation helps tires wear evenly, extending their lifespan.
- Vehicle Performance: Correct tire pressure ensures optimal vehicle handling and braking performance.
Understanding TPMS Warnings
The Ford Maverick’s TPMS typically alerts the driver in two ways:<>
- A steady TPMS warning light indicates that one or more tires are significantly under-inflated.
- A flashing TPMS light that then remains solid may indicate a system malfunction.
Legal Requirements for TPMS
In the United States, the TREAD Act mandated that all vehicles manufactured after September 1, 2007, be equipped with TPMS. This legislation was enacted to improve vehicle safety following a series of fatal accidents related to under-inflated tires.<>
TPMS Technology in Ford Maverick
The Ford Maverick uses a direct TPMS, which means each wheel has a sensor that directly measures the air pressure. This system is more accurate than indirect systems that use wheel speed sensors to infer tire pressure.<>
Conclusion
Understanding how to reset and relearn your Ford Maverick’s TPMS is an essential skill for any owner. By following these procedures, you can ensure your vehicle’s safety systems are functioning correctly, potentially preventing accidents and improving your driving experience. Remember, while these procedures are generally straightforward, if you’re unsure or encounter persistent issues, it’s always best to consult with a certified Ford technician.<>
<>