MERCURY MARINER OIL RESET

HOW TO RESET Mercury MARINER Oil Life Service Reminder

This is a simple tutorial on how to reset the OIL LIFE service maintenance reminder indicator light on Mercury Mariner. Please follow the step by step tutorial below for your reference.

4 EASY STEPS MERCURY MARINER OIL LIFE RESET

STEP 1

  • Turn the ignition On.

STEP 2

  • Press and release the SETUP button to display “OIL LIFE XXX% HOLD RESET = NEW”.

mariner oil life

STEP 3

  • Press and hold the RESET button for two seconds and release to reset the oil life to 100%.

Mariner oil life reset to 100%

STEP 4

  • The oil life reset is complete. Turn off the ignition, then start the engine to verify if the oil life has been successfully reset.

NOTE:

  • An oil change is required whenever indicated by the message center and according to the recommended maintenance schedule.
  • To change oil life 100% miles value from 7,500 miles (12,000 km) or 12 months to another value, read below.
  • Once “OIL LIFE SET TO XXX%” is displayed, release and press the RESET button to change the Oil Life Start Value. Each release and press will reduce the value by 10%.
  • Oil life start value of 100% equals 7,500 miles (12,000 km) or 12 months. For example, setting oil life start value to 60% sets the oil life start value to 4,500 miles (7,200 km) and 219 days.

Thank you very much for visiting my website. I am hoping this tutorial will be helpful to you. – Erwin C. Salarda

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

error: Content is protected !! Thank you!!