HOW TO RESET: Maintenance Required Toyota 4Runner

MAINT REQD: TOYOTA 4 RUNNER

Instruction on how to reset the maintenance required warning message on Toyota 4-Runner (N210- N280- Limited- Nightshade- SR5-TRD OFF Road-TRD- Venture) from year 2003-2004-2005-2006-2007-2008-2009-2010-2011-2012-2013-2014-2015-2016-2017-2018-2019-2020.

2003-2009 4-Runner (N210) Maint Reqd Reset

STEP 1

  • Turn ignition to the “RUN” position.

STEP 2

  • Press Reset knob Button to display the odometer and turn ignition off.Toyota 4Runner Maint Reset 2003-2009

STEP 3

  • Then Turn The IGNITION To OFF.

STEP 4

  • Press and hold down reset knob and turn the ignition to the “RUN” position. Hold the Reset knob until light turns off, it will turn on for 3 seconds, flash for 2 seconds, then turn on for 1 more second.

STEP 5

  • Turn ignition off. Reset Complete.

NOTE: Light will remain flashing if reset has failed, Repeat the Procedure.

 

 


2010-2020 Maintenance Required Toyota 4Runner (n280) Reset

Toyota 4 Runner Maintenance Required Reset

STEP 1

  • With engine running, Press the trip meter reset button  to bring up trip meter “A”.2010-2020 Maintenance Required Reset Toyota 4Runner 2010-2020

STEP 3

  • Then Turn The IGNITION To OFF.

STEP 4

  • While holding the trip meter reset button, press the “ENGINE START/STOP” button once/Turn Ignition key on. Continue to hold the button until “000000 or RESETTING MAINTENANCE DATA” is displayed.

STEP 5

  • Turn ignition off. MAINTENANCE RESET is complete.

This tutorial may possible work for the following car model.

  • Toyota SW4,
  • Toyota Hilux Surf
  • Lexus GX
  • Toyota Land Cruiser Prado
  • Toyota FJ Cruiser
  • Toyota Hilux
  • Toyota Hilux Surf
  • Toyota Tacoma
  • Toyota Fortuner

 

Thank you very much!:)