HOW TO Reset the TPMS WARNING Light on Ford Cars

HOW TO Reset the TPMS WARNING Light on Ford Cars

by

FORD TPMS Reset

FORD TPMS RESET INSTRUCTION

 

NOTE: YOU NEED TPMS SCAN TOOL TO DO THIS TUTORIAL.

Relearn Procedure for Models WITH STANDARD IGNITION.

1.Inflate all tires to pressure listed on vehicleplacard.

2.Turn ignition to OFF position and press and release brake pedal.

3.Cycle ignition from the OFF to RUN position 3 times, ending in the RUN position.

4.Press and release brake pedal.

5.Turn ignition to OFF position.

6.Cycle ignition from the OFF to RUN position 3 times, ending in the RUN position.

7.Horn will sound once,and the TPMS telltale will blink once, indicating train mode is initiated. If equipped with a message center, it will display TRAIN LF TIRE.

8.Starting with the LF tire, use your TPMS scan tool to scan each sensor in the following order: LF, RF, RR, LR (and full size spare if equipped). The horn will sound once each sensor has been recognized.

9.After training LR tire, the message center will display TRAINING MODE COMPLETE. If the vehicle is not equipped with the message center display, successful completion can be verified by turning the ignition to the OFF position and not hearing the horn sound. If the horn sounds, then the training procedure must be repeated.

10.Turn ignition to the OFF position.

 

elearn Procedure for Models WITH PUSH-BUTTON IGNITION.

1.Inflate all tires to pressure listed on vehicleplacard.

2.With the vehicle off, press and release the brake pedal.

3.Press,and hold,the START button until a chime sounds.

4.Power OFFby pushing the button 1 time.

5.Press,and hold, theSTART button until a chime sounds.

6.Power OFFby pushing the button 1 time.

7.Press,and hold, theSTART button until a chime sounds.

8.Press and release the brake pedal.

9.Power OFFby pushing the button 1 time.

10.Press,and hold, theSTART button until a chime sounds.

11.Power OFFby pushing the button 1 time.

12.Press,and hold, theSTART button until a chime sounds.

13.Power off by pushing the button 1 time.

14.Press,and hold, theSTART button until a chime sounds.

15.Horn will sound once,and the TPMS telltale will blink once, indicating train mode is initiated. If equipped with a message center, it will display TRAIN LF TIRE.

16.Starting with the LF tire, use your TPMS scan tool to scan each sensor in the following order: LF, RF, RR, LR (and full size spare if equipped). The horn will sound once each sensor has been recognized.

17.After training LR tire, the message center will display TRAINING MODE COMPLETE. If the vehicle is not equipped with themessage center display, successful completion can be verified by turning the ignition to the OFF position and not hearing the horn sound. If the horn sounds, then the training procedure must be repeated.

18.Turn ignition to the OFF position.