AVALANCE 2001-2006 OIL LIFE RESET
OIL RESET INSTRUCTION FOR THIS OIL LIFE MESSAGE WITHOUT THE DRIVER INFORMATIN CENTER BUTTON (DIC BUTTON).
STEP 1
- Turn the ignition On. Don’t start the Avalanche Car Engine.
STEP 2
- Wait a moment,until the ENGINE OIL LIFE will display on the instrument cluster.
STEP 3
- While the ENGINE OIL LIFE is displayed. Fully press the accelerator pedal slowly three times within five seconds.
- After Pressing the GAS pedal 3x. The OIL LIFE RESET appear on the INSTRUMENT CLUSTER.
STEP 4
- After 10 – 15 seconds. The ENGINE OIL LIFE: 100% is displayed on the INSTRUMENT CLUSTER.
STEP 5
- Turn Ignition Off. Oil reset is now complete.
OIL RESET FOR THIS OIL LIFE WARNING MESSAGE WITH THE DRIVER INFORMATION CENTER BUTTON (DIC BUTTON)
STEP 1
- Turn the ignition On. Don’t start the Avalanche Car Engine.
STEP 2
- Press the FUEL INFORMATION BUTTON (LABEL B BUTTON), to display the remaining ENGINE OIL LIFE.
STEP 3
- While the ENGINE OIL LIFE is displayed. Fully press the accelerator pedal slowly three times within five seconds.
- The CHANGE ENGINE OIL message will appear. Also OIL LIFE RESET appear on the INSTRUMENT CLUSTER.
STEP 4
- After OIL LIFE RESET message appear. PRESS THE ENTER button (D label button) to reset the OIL LIFE. If D button will not work. Try to Press C. until the OIL LIfe RESET TO 100%.
STEP 5
- Turn Ignition Off. Oil reset is now complete.
OIL RESET INSTRUCTION FOR THIS OIL CHANGE SOON MESSAGE
STEP 1
- Turn the ignition On. Don’t start the Avalanche Car Engine.
STEP 2
- Fully press the accelerator pedal slowly three times within five seconds.
- After Pressing gas pedal 3X. The CHANGE ENGINE OIL warning light will flash 6x or more. The Oil life is now reset.
- If not flashing repeat the procedure.
STEP 3
- Turn Ignition Off. Oil reset is now complete.
AVALANCE 2007-2013 CHANGE ENGINE OIL SOON RESET
RESET WITHOUT USING THE DIC BUTTON.
STEP 1
- Turn Ignition ON. Don’t start the Engine.
STEP 2
- After Ignition ON. immediately PRESS THE GAS PEDAL 3X WITH 5X.
STEP 3
- After PRESSING GAS PEDAL 3X. Start the CAR ENGINE. The CHANGE ENGINE OIL SOON warning message should be gone.
STEP 4
- Turn the engine OFF. OIL Reset is now complete.
RESET USING THE DIC BUTTON
STEP 1
- Turn Ignition ON. Don’t start the Engine.
STEP 2
- Press the INFORMATION BUTTON to display the remaining OIL LIFE.
STEP 3
- While the REMAINING OIL LIFE is displayed. PRESS the RESET BUTTON to RESET THE OIL LIFE TO 100%.
STEP 4
- Turn ignition Off. Oil reset is now complete.
THIS TUTORIAL MAY WORK FOR THE FOLLOWING CAR MODEL
- Chevrolet Silverado
- GMC Sierra
- Chevrolet Suburban
- GMC Yukon XL
- Cadillac Escalade ESV
- Cadillac Escalade EXT
Engine Oil Life System
When to Change Engine Oil
This vehicle has a computer system that indicates when to change the engine oil and filter. This is based on a combination of factors which include engine revolutions, engine temperature, and miles driven. Based on driving conditions, the mileage at which an oil change is indicated can vary considerably. For the oil life system to work properly, the system must be reset every time the oil is changed.
CHANGE ENGINE OIL SOON
This message displays when the engine oil needs to be changed. When you change the engine oil, be sure to reset the Oil Life System.
The Oil Life display must be reset after each oil change. It will notreset itself. Do not reset the Oil Life display accidentally at any time other than when the oil has just been changed. It cannot be reset accurately until the next oil change. To reset the engine oil life system,follow the instruction above.