Volkswagen Tharu TPMS Reset

How to Reset and Relearn the TPMS of Volkswagen Tharu in All Generations

by

How to Reset and Relearn the TPMS of Volkswagen Tharu in All Generations

Learn how to reset and relearn the Tire Pressure Monitoring System (TPMS) for all generations of the Volkswagen Tharu. This guide explains what TPMS is, when to reset it, and provides step-by-step instructions for both first and second-generation models. It also covers troubleshooting tips and the importance of maintaining proper tire pressure for safety and performance. Follow these simple steps to keep your vehicle running smoothly.<>

The Tire Pressure Monitoring System (TPMS) is a crucial safety feature in modern vehicles, including the Volkswagen Tharu. This system helps drivers maintain proper tire pressure, ensuring optimal vehicle performance, fuel efficiency, and safety. In this comprehensive guide, we’ll explore how to reset and relearn the TPMS for all generations of the Volkswagen Tharu.<>

Understanding TPMS in Volkswagen Tharu

Before diving into the reset and relearn procedures, it’s essential to understand what TPMS is and how it functions in the Volkswagen Tharu.<>

What is TPMS?

TPMS is an electronic system designed to monitor the air pressure inside pneumatic tires. It reports real-time tire pressure information to the driver, typically through a dashboard display or warning light.<>

Types of TPMS in Volkswagen Tharu

Volkswagen Tharu models may use one of two types of TPMS:<>

  1. Direct TPMS: Uses physical pressure sensors inside each tire to measure air pressure.
  2. Indirect TPMS: Utilizes the vehicle’s ABS sensors to detect changes in tire rotation, which can indicate low tire pressure.

It’s crucial to identify which system your Tharu uses, as the reset and relearn procedures may differ.<>

When to Reset and Relearn TPMS

You should reset and relearn your Volkswagen Tharu’s TPMS in the following situations:<>

  • After rotating tires
  • When replacing one or more tires
  • After adjusting tire pressure
  • When the TPMS warning light remains on after inflating tires to the correct pressure
  • After replacing a TPMS sensor (for direct TPMS)

General TPMS Reset Procedure for Volkswagen Tharu

While specific steps may vary slightly between generations, here’s a general procedure for resetting the TPMS in a Volkswagen Tharu:<>

  1. Ensure all tires are inflated to the correct pressure as specified in your owner’s manual or on the driver’s side door jamb sticker.
  2. Turn the ignition to the “ON” position without starting the engine.
  3. Using the steering wheel controls, navigate to the vehicle settings menu in the instrument cluster display.
  4. Find and select the “Tire Pressure Monitoring” or “TPMS” option.
  5. Choose “Reset” or “Calibrate” and follow the on-screen prompts to confirm.
  6. The system will usually display a message confirming the reset process has begun.
  7. Start the engine and drive the vehicle for about 20 minutes at speeds above 15 mph (24 km/h) to complete the relearn process.

TPMS Reset and Relearn for Different Volkswagen Tharu Generations

Let’s look at the specific procedures for different generations of the Volkswagen Tharu:<>

First Generation Volkswagen Tharu (2018-2022)

The first-generation Tharu typically uses an indirect TPMS system. To reset:<>

  1. Inflate all tires to the correct pressure.
  2. Turn the ignition to “ON”.
  3. Press the infotainment system’s “MENU” button.
  4. Select “Vehicle” > “Setup” > “Tires”.
  5. Choose “SET” and confirm to start the calibration process.
  6. Drive the vehicle for about 20 minutes to complete the relearn process.

Second Generation Volkswagen Tharu (2023-Present)

The second-generation Tharu may use a direct TPMS system. The reset procedure is:<>

  1. Ensure correct tire pressure in all tires.
  2. Turn the ignition to “ON”.
  3. Using the steering wheel controls, navigate to “Vehicle Settings” in the digital cockpit.
  4. Select “Tire Pressure Monitoring System”.
  5. Choose “Store Tire Pressures” and confirm.
  6. The system will display a confirmation message.
  7. Drive the vehicle for about 20 minutes at varying speeds to complete the relearn process.

TPMS Sensor Relearn Procedure (for Direct TPMS)

If your Volkswagen Tharu uses a direct TPMS and you’ve replaced a sensor, you may need to perform a sensor relearn procedure:<>

  1. Ensure the vehicle is in “Park” with the engine off.
  2. Turn the ignition to “ON” without starting the engine.
  3. Using a TPMS activation tool, activate each TPMS sensor in this order: Left Front, Right Front, Right Rear, Left Rear.
  4. Wait for the horn to beep after each sensor is activated, confirming the vehicle has learned the sensor.
  5. After all sensors are learned, turn the ignition off.
  6. Inflate all tires to the correct pressure.
  7. Drive the vehicle for about 20 minutes to complete the relearn process.

Troubleshooting TPMS Issues

If you encounter problems with your Volkswagen Tharu’s TPMS, consider these troubleshooting steps:<>

TPMS Light Stays On

  • Check tire pressures and adjust if necessary
  • Perform a system reset as described above
  • Check for damaged TPMS sensors (for direct TPMS)
  • Consult a Volkswagen dealer if the issue persists

TPMS Light Flashes

A flashing TPMS light typically indicates a system malfunction. In this case:<>

  • Check for loose or corroded battery connections
  • Verify that aftermarket wheels or tires are compatible with the TPMS
  • Have the system scanned for error codes at a Volkswagen dealership

Maintaining Your Volkswagen Tharu’s TPMS

To ensure your TPMS functions correctly:<>

  • Regularly check tire pressures, including the spare tire
  • Have TPMS sensors checked during routine maintenance
  • Replace TPMS sensor batteries as recommended (typically every 5-7 years)
  • Use TPMS-compatible tires and wheels when replacing

The Importance of Proper Tire Pressure

Maintaining correct tire pressure in your Volkswagen Tharu is crucial for:<>

  • Optimal fuel efficiency
  • Even tire wear and longer tire life
  • Improved handling and safety
  • Reduced risk of tire failure

Conclusion

Understanding how to reset and relearn the TPMS in your Volkswagen Tharu is essential for maintaining your vehicle’s safety and performance. By following the procedures outlined in this guide, you can ensure your TPMS functions correctly, providing accurate tire pressure information and peace of mind during your drives.<>

Remember, while these procedures are generally applicable to most Volkswagen Tharu models, always consult your vehicle’s owner’s manual for model-specific instructions. If you’re unsure or uncomfortable performing these procedures, don’t hesitate to seek assistance from a qualified Volkswagen technician.<>

FAQs

1. How often should I check my tire pressure?

It’s recommended to check your tire pressure at least once a month and before long trips.<>

2. Can I drive with the TPMS light on?

While you can drive short distances, it’s best to check your tire pressures as soon as possible when the TPMS light illuminates.<>

3. Does the TPMS need to be reset after every tire rotation?

Yes, it’s generally recommended to reset the TPMS after rotating tires to ensure accurate pressure readings.<>

4. Can I reset the TPMS myself, or do I need a professional?

In most cases, you can reset the TPMS yourself following the procedures outlined in this guide. However, if you’re unsure or if problems persist, consult a professional.<>

5. Will using winter tires affect my TPMS?

If your winter tires have TPMS sensors, they should work with your system. However, you may need to perform a reset or relearn procedure when switching to winter tires.<>

By following these guidelines and maintaining your Volkswagen Tharu’s TPMS, you’ll ensure optimal performance, safety, and longevity for your vehicle’s tires.<>

 

<>