Honda CRV Tire Pressure TPMS Reset Tutorial
This is a guide on resetting, relearning, and programming the tire pressure monitor system (TPMS) in your Honda Cr-V. Please follow the instructions below.
HONDA CRV 2011-2016 Tire Pressure TPMS Reset
Tire pressure maintenance reminder reset guide for Honda CRV from the year 2011, 2012, 2013, 2014, 2015, 2016.
Relearn Procedure when Replacing a Sensor on Honda CR-V
1. Inflate all tires to the pressure listed on the vehicle placard.
2. Select OBD II (TPMS OBD Tool) from your Tool’s menu.
3. Starting with the LF tire, use your Tool to scan each sensor in the following order: LF, RF, RR, LR (and full size spare if equipped).
4. After all sensor IDs have been read, turn ignition to the ON position with the engine OFF (not the ACC position).
5. Connect the OBD II Connector to the Tool then to the vehicle’s OBD II port. Make sure your connection is secure and the green light is on.
6. Select UPLOAD CAR IDS, from the Tool’s menu, and upload the sensor IDs.
7. When RELEARN COMPLETE / IDs UPLOADED TO CAR is displayed, the ID’s have been successfully uploaded.
8. Drive the vehicle above 25 MPH, for 10 – 45 minutes, and monitor the low tire pressure monitor MIL, to ensure it goes off during the drive cycle.
Relearn Procedure when Resetting the Tire Pressure or After Rotating the Tires on Honda CR-V
1. Ensure tires are inflated to the pressure indicated on the tire placard.
2. Drive vehicle for at least 12 minutes above 30mph in order for system to learn new sensor IDs.
HONDA CR-V 2016-2022 TIRE PRESSURE LOW CALIBRATE
A simple and easy to follow guide on how to reset or relearn the tire pressure low TPMS maintenance indicator reminder message on Honda CR-V from the year 2016, 2017, 2018, 2019, 2020, 2021 to 2022.
Honda CRV Models with Display Audio
Step 1
- Turn the ignition switch to ON. Don’t start the engine.
- Gear to the P position for CVT and N position for Manual transmission.
Step 2
- Press HOME button.
Step 3
- Select SETTINGS
Step 4
- Select VEHICLE.
Step 5
- Select TPMS CALIBRATION
Step 6
- Select Calibrate.
The Tire Pressure Monitoring System (TPMS) will automatically calibrate itself once you choose the CALIBRATE button, at which point the Tire pressure low notification will no longer appear.
MODELS WITH COLOR AUDIO SYSTEM
IMPORTANT REMINDER
You must start TPMS calibration every time you:
• Adjust the pressure in one or more tires.
• Rotate the tires.
• Replace one or more tires.
■ Inflation guidelines
Properly inflated tires provide the best combination of handling, tread life, and comfort. Refer to the driver’s doorjamb label or specification’s page for the specified pressure.
Underinflated tires wear unevenly, adversely affect handling and fuel economy, and are more likely to fail from overheating. Overinflated tires make your vehicle ride harshly, are more prone to road hazards, and wear unevenly.
Every day before you drive, look at each of the tires. If one looks lower than the others, check the pressure with a tire gauge.
At least once a month or before long trips, use a gauge to measure the pressure in all tires, including the spare *. Even tires in good condition can lose 1 to 2 psi (10 to 20 kPa, 0.1 to 0.2 kgf/cm2) per month.