Ford Edge TPMS Reset

How to: Ford Edge 2007-2014 TPMS Reset / Relearn

by

FORD EDGE TPMS RESET

How to reset / relearn the TPMS on Ford Edge from year 2007-2008-2009-2010-2011-2012-2013-2014.

About Ford Edge

The Ford Edge is a mid-size crossover SUV manufactured by Ford Motor Company.

The first generation Edge is based on the Ford CD3 platform shared with the first generation Ford Fusion, Mazda CX-9, first and second generation Mazda 6 and Lincoln MKX.

Ford also markets the second-generation Edge in European markets. The Edge uses Ford’s CD4 platform.

The vehicle is assembled at Ford’s Oakville Assembly, Ontario, Canada assembly plant.(Thanks:wiki)

TPMS RESET

Note: Your need TPMS Scan tool for this car model.

Relearn Procedure for Models WITH STANDARD IGNITION.

  1. Inflate all tires to pressure listed on vehicleplacard.
  2. Turn ignition to OFF position and press and release brake pedal.
  3. Cycle ignition from the OFF to RUN position 3 times, ending in the RUN position.
  4. Press and release brake pedal.
  5. Turn ignition to OFF position.
  6. Cycle ignition from the OFF to RUN position 3 times, ending in the RUN position.
  7. Horn will sound once,and the TPMS telltale will blink once, indicating train mode is initiated. If equipped with a message center, it will display TRAIN LF TIRE.
  8. .Starting with the LF tire, use your TPMS scan tool to scan each sensor in the following order: LF, RF, RR, LR (and full size spare if equipped). The horn will sound once each sensor has been recognized.
  9. After training LR tire, the message center will display TRAINING MODE COMPLETE. If the vehicle is not equipped with the message center display, successful completion can be verified by turning the ignition to the OFF position and not hearing the horn sound. If the horn sounds, then the training procedure must be repeated.
  10. Turn ignition to the OFF position.

 

 

Relearn Procedure for Models WITH PUSH-BUTTON IGNITION.

  1. Inflate all tires to pressure listed on vehicle placard.2.With the
  2. vehicle off, press and release the brake pedal.
  3. Press,and hold,the START button until a chime sounds.
  4. Power OFF by pushing the button 1 time.
  5. Press,and hold, the S TART button until a chime sounds.
  6. Power OFF by pushing the button 1 time.
  7. Press,and hold, the START button until a chime sounds.
  8. Press and release the brake pedal.
  9. Power OFF by pushing the button 1 time.
  10. Press,and hold, theS TART button until a chime sounds.
  11. Power OFF by pushing the button 1 time.
  12. Press,and hold, the START button until a chime sounds.
  13. Power off by pushing the button 1 time.
  14. Press,and hold, the START button until a chime sounds.
  15. Horn will sound once,and the TPMS telltale will blink once, indicating train mode is initiated. If equipped with a message center, it will display TRAIN LF TIRE.
  16. Starting with the LF tire, use your TPMS scan tool to scan each sensor in the following order: LF, RF, RR, LR (and full size spare if equipped). The horn will sound once each sensor has been recognized.
  17. After training LR tire, the message center will display TRAINING MODE COMPLETE. If the vehicle is not equipped with the message center display, successful completion can be verified by turning the ignition to the OFF position and not hearing the horn sound. If the horn sounds, then the training procedure must be repeated.
  18. 18.Turn ignition to the OFF position.

 

Thank you very much!