Sat. Oct 23rd, 2021

FIXED: Switching Hardisk From INTEL to AMD Windows Wont Start

Byerwincsalarda

Aug 31, 2019 amd, amd to intel, change board, failure, intel, loop, reboot, restart computer

FIXED WINDOWS WONT OPEN AFTER CHANGE CPU AND MOTHERBOARD

FIXED: Switching Hardisk From INTEL to AMD Windows Wont Start

How to fix windows wont load when transferring hard disk to other motherboard, or other processor brand. There will be a problem when you are installing your hard disk in intel cpu then transfer your disk to AMD or vice versa. Below are the complete steps to fix this problem.

YOU MUST HAVE:

You must have a BOOTABLE Windows operating system. (Windows 7, 8, 10)
Configure your BIOS to FIRST BOOT the USB BOOTABLE DEVICE.
Let the windows installer Load. in my picture i am using windows 7 bootable.

NOW IS THE TIME TO FIX THE PROBLEM. IN MY SITUATION I AM NOW IN WINDOWS INSTALLATION INTERFACE. PLEASE FOLLOW CAREFULLY IN ALL IMAGES BELOW.

1-Windows Installation Main Interface — 1-Windows Installation Main Interface. I am using windows 7 bootable.

2-Press SHIFT key + F10 - The Command prompt will open — 2-Press SHIFT key + F10 – The Command prompt will open

3. After the command promp open. Just type REGEDIT then Press ENTER key — 3. After the command prompt open. Just type REGEDIT then Press ENTER

4.In your Registry Locate the HKEY_LOCAL_MACHINE — 4.In your Registry Locate the HKEY_LOCAL_MACHINE

5. After you click the HEKY_LOCAL_MACHINE. Click FIle on upper menu then Select LOAD HIVE — 5. After you click the HEKY_LOCAL_MACHINE. Click FIle on upper menu then Select LOAD HIVE

6. AFTER YOU CLICK LOAD HIVE. THE WINDOWS WILL OPEN. NOW SELECT COMPUTER — 6. AFTER YOU CLICK LOAD HIVE. THE WINDOWS WILL OPEN. NOW SELECT COMPUTER

7-AFTER YOU CLICK COMPUTER. SELECT #LOCAL DISK C: — 7-AFTER YOU CLICK COMPUTER. SELECT #LOCAL DISK C:

8. SELECT AND CLICK WINDOWS FOLDER — 8. SELECT AND CLICK WINDOWS FOLDER

9. AFTER YOU CLICK WINDOWS FOLDER, SELECT AND CLICK SYSTEM32 FOLDER — 9. AFTER YOU CLICK WINDOWS FOLDER, SELECT AND CLICK SYSTEM32 FOLDER

10. SELECT AND CLICK CONFIG FOLDER — 10. SELECT AND CLICK CONFIG FOLDER

11. AFTER YOU CLICK CONFIG FOLDER, SELECT #SYSTEM — 11. AFTER YOU CLICK CONFIG FOLDER, SELECT #SYSTEM

12. AFTER YOU SELECT SYSTEM THE LOAD HIVE WILL OPEN. NOW TIME TO CREATE A NEW OF THE FILE WE LOAD. SO IN MY EXAMPLE I WILL NAME IT AS OFFLINE — 12. AFTER YOU SELECT SYSTEM THE LOAD HIVE WILL OPEN. NOW TIME TO CREATE A NEW NAME OF THE FILE WE LOAD. SO IN MY EXAMPLE I WILL NAME IT AS OFFLINE

13. The OFFLINE REGISTRY WILL BE ADDED UNDER THE CATEGORY OF HKEY_LOCAL_MACHINE — 13. The OFFLINE REGISTRY WILL BE ADDED UNDER THE CATEGORY OF HKEY_LOCAL_MACHINE

14. CLICK THE + SIGN IN OFFLINE REGISTRY CATEGORY THEN SELECT CONTROLSET0001 — 14. CLICK THE + SIGN IN OFFLINE REGISTRY CATEGORY THEN SELECT #CONTROLSET0001

15. AFTER YOU CLICK THE SUBMENU WILL OPEN NOW CLICK THE + SIGN ON SERVICES — 15. AFTER YOU CLICK THE #CONTROLSET001, THE SUB MENU WILL OPEN, NOW CLICK THE + SIGN ON #SERVICES.

16. NAVIGATE MSAHCI — 16. NAVIGATE #MSAHCI FOLDER

17. IN MSAHCI WINDOW DOUBLE CLICK START — 17. IN MSAHCI WINDOW DOUBLE CLICK #START

18. CHANGE THE VALUE TO ZERO — 18. CHANGE THE VALUE TO ZERO

19. IN #SERVICES CATEGORY ALSO NAVIGATE -#PCIIDE FOLDER — 19. IN #SERVICES CATEGORY ALSO NAVIGATE –#PCIIDE FOLDER

20. IN PCIIDE WINDOW DOUBLE CLICK START — 20. IN PCIIDE WINDOW DOUBLE CLICK #START

21. CHANGE THE VALUE TO ZERO — 21. CHANGE THE VALUE TO ZERO

22. IN SERVICE CATEGORY AGAIN , NAVIGATE THE IASTORV — 22. IN SERVICE CATEGORY AGAIN , NAVIGATE THE IASTORV

23. IN IASTORV WINDOWS DOUBLE CLICK START — 23. IN IASTORV WINDOWS DOUBLE CLICK START

24. CHANGE THE VALUE TO ZERO — 24. CHANGE THE VALUE TO ZERO

25. NOW CLICK AGAIN THE OFFLINE REGISTRY — 25. NOW BACK TO THE TOP. CLICK AGAIN THE #OFFLINE FOLDER IN REGISTRY

26. SELECT FILE — 26. AFTER YOU SELECT THE #OFFLINE FOLDER, WHILE IT IS BEING HIGHLIGHTED CLICK THE FILE MENU ON THE UPPER LEFT WINDOW.

27. SELECT UNLOAD HIVE — 27. SELECT UNLOAD HIVE

28. THEN CLICK YES — 28. THEN CLICK YES

AFTER THAT REBOOT YOUR COMPUTER

29. REBOOT COMPUTER AND YOUR DONE. THE COMPUTER WILL START WITHOUT THE PROBLEM — 29. REBOOT COMPUTER AND YOUR DONE. THE COMPUTER WILL START WITHOUT THE PROBLEM

THANK YOU VERY MUCH. -erwin 🙂

By erwincsalarda

I am Erwin Salarda, and I'm from the Philippines. I am really enthusiastic about learning new things in life, and my main interests are computers and automobiles. I willingly developed everything on my website so that I may share it with you.

Related Post