Cadillac TPMS Reset / Relearn Instruction Manual

CADILLAC TPMS RESET

Instruction on how to reset the TPMS light / Warning indicator on Cadillac Cars.

CADILLAC TPMS RESET

CADILLAC TPMS RESET INSTRUCTION 1

Note: TPMS Scan Tool is Necessary when Relearning the TPMS of this Model.

Sensor Relearn Procedure:

1. Inflate all tires to the pressure listed on the placard.
2. Turn ignition to the ON/RUN position with the engine OFF (not the ACC position) and lower the driver’s side window.
3. Scroll to the Tire Pressures screen, using the steering wheel buttons, then hold down the checkmark button until the horn sounds.
4. Starting with the LF tire, use your TPMS scan tool to scan each sensor in the following order: LF, RF, RR and LR. The horn will chirp, after the vehicle has received a signal from each sensor. After activating the LR tire, the horn will chirp twice signifying the relearn is complete.
5. Turn the ignition to the OFF position.

Sensor Relearn Procedure (select models):

1. Inflate all tires to the pressure listed on the placard.
2. Turn ignition to the ON/RUN position with the engine OFF (not the ACC position) and lower the driver’s side window.
3. Press and release the trip odometer button to scroll to the Tire Pressure display.
4. Hold down the trip odometer button for 5 seconds, then press the button again to confirm.
5. Starting with the LF tire, use your TPMS scan tool to scan each sensor in the following order: LF, RF, RR and LR. The horn will chirp, after the vehicle has received a signal from each sensor. After activating the LR tire, the horn will chirp twice signifying the relearn is complete.
6. Turn the ignition to the OFF position.

Learn More👉 HOW TO RESET: Volkswagen Tiguan Service Maintenance Light

CADILLAC TPMS RESET INSTRUCTION 2

Note: TPMS Scan Tool is Necessary when Relearning the TPMS of this Model.

Procedure using another Properly Formatted TPMS Scan Tool

1. Inflate all tires to the pressure listed on the placard.
2. Turn ignition to the ON/RUN position with the engine OFF (not the ACC position).
3. Turn the headlight switch from OFF to parking lamps 4 times within five seconds. The horn sounds twice to signal the receiver is in relearn mode.
4. Starting with the LF tire, use a properly formatted TPMS scan tool to scan each sensor in the following order: LF, RF, RR and LR. The horn will chirp, after the vehicle has received a signal from each sensor. After activating the LR tire, the horn will chirp twice signifying the relearn is complete.
5. Turn the ignition to the OFF position.

Relearn Procedure for Models Equipped with a Driver’s Information Center (DIC):

1. Inflate all tires to the pressure listed on the placard.
2. Turn ignition to the ON/RUN position with the engine OFF (not the ACC position) and lower the driver’s side window.
3. Press the Vehicle Information button (located to the left or right of the instrument cluster) repeatedly until “LEARN TIRE PRESSURES” is displayed. Then press the checkmark button.
4. Starting with the LF tire, use a properly formatted TPMS scan tool to scan each sensor in the following order: LF, RF, RR and LR. The horn will chirp, after the vehicle has received a signal from each sensor. After activating the LR tire, the horn will chirp twice signifying the relearn is complete.
5. Turn the ignition to the OFF position.

CADILLAC TPMS RESET INSTRUCTION 3

Note: TPMS Scan Tool is Necessary when Relearning the TPMS of this Model.

Relearn Procedure for Models Equipped with Keyless Entry:

1. Inflate all tires to the pressure listed on the placard.
2. Turn ignition to the ON/RUN position with the engine OFF (not the ACC position).
3. Using the keyless entry (key fob), press and hold the lock and the unlock buttonssimultaneously until the horn sounds.
4. Starting with the LF tire, use a properly formatted TPMS scan tool to scan each sensor in the following order: LF, RF, RR and LR. The horn will chirp, after the vehicle has received a signal from each sensor. After activating the LR tire, the horn will chirp twice signifying the relearn is complete.
5. Turn the ignition to the OFF position.

Relearn Procedure for Models Equipped with a Driver’s Information Center (DIC):

1. Inflate all tires to the pressure listed on the placard.
2. Turn ignition to the ON/RUN position with the engine OFF (not the ACC position) and lower the driver’s side window.
3. Press the Vehicle Information button (located to the left or right of the instrument cluster) repeatedly until “LEARN TIRE PRESSURES” is displayed. Then press the checkmark button.
4. Starting with the LF tire, use a properly formatted TPMS scan tool to scan each sensor in the following order: LF, RF, RR and LR. The horn will chirp, after the vehicle has received a signal from each sensor. After activating the LR tire, the horn will chirp twice signifying the relearn is complete.
5. Turn the ignition to the OFF position.

Learn More👉 BMW M6 (E63/E64/F06/F12/F13) 2006-2018 TPMS Reset

Relearn Procedure for Models NOT Equipped with a Keyless Entry or DIC:

1. Inflate all tires to the pressure listed on the placard.
2. Turn ignition to the ON/RUN position with the engine OFF (not the ACC position) and lower the driver’s side window.
3. Press the trip odometer button until “LEARN TIRE PRESSURES” is displayed. Then hold down the trip odometer button until the horn chirps.
4. Starting with the LF tire, use a properly formatted TPMS scan tool to scan each sensor in the following order: LF, RF, RR and LR. The horn will chirp, after the vehicle has received a signal from each sensor. After activating the LR tire, the horn will chirp twice signifying the relearn is complete.
5. Turn the ignition to the OFF position.

CADILLAC TPMS RESET INSTRUCTION 4

Note: TPMS Scan Tool is Necessary when Relearning the TPMS of this Model.

Sensor Relearn Procedure with Steering Wheel Buttons:

1. Ensure all tires are inflated to the pressures listed on the tire placard.
2. Turn the ignition switch to the ON position (engine off) and lower the driver side window.
3. Scroll to the Tire Pressure screen using the steering wheel buttons then hold down the checkmark button until the horn sounds.
4. Starting with the LF tire, use a properly formatted TPMS scan tool to scan each sensor in the following order: LF, RF, RR and LR. The horn will chirp, after the vehicle has received a signal from each sensor. After activating the LR tire, the horn will chirp twice signifying the relearn is complete.
5. Turn ignition to the OFF position.

Sensor Relearn Procedure not equipped with Steering Wheel Buttons:

1. Ensure all tires are inflated to the pressures listed on the tire placard.
2. Turn the ignition switch to the ON position (engine off) and lower the driver side window.
3. Press and release the trip odometer button to scroll to the Tire Pressure display.
4. Hold down the trip odometer button for five seconds then press the button again to confirm.
5. Starting with the LF tire, use a properly formatted TPMS scan tool to scan each sensor in the following order: LF, RF, RR and LR. The horn will chirp, after the vehicle has received a signal from each sensor. After activating the LR tire, the horn will chirp twice signifying the relearn is complete.
6. Turn ignition to the OFF position.

Learn More👉 How to Reset / Relearn TPMS Light on TOYOTA Avalon

CADILLAC TPMS RESET INSTRUCTION 5

Note: TPMS Scan Tool is Necessary when Relearning the TPMS of this Model.

Sensor Relearn Procedure with Steering Wheel Buttons:

1. Ensure all tires are inflated to the pressures listed on the tire placard.
2. Start the Vehicle.
3. Using the streering wheel’s keypad, select “Settings,””Display Options,” then “Tire Pressure” to turn on the Tire Pressure readout display”
4. Exit the “Settings” menu and scroll to the Tire Pressure Screen.
5. Hold down the SEL/Checkmark button until the horn sounds twice.
6. Starting with the LF tire, use your TPMS Scan Tool to scan each sensor in the following order: LF, RF, RR and LR. The horn will chirp, after the vehicle has received a signal from each sensor. After activating the LR tire, the horn will chirp twice signifying the relearn is complete.
7. Shut the vehicle off.

CADILLAC TPMS RESET INSTRUCTION 6

Note: TPMS Scan Tool is Necessary when Relearning the TPMS of this Model.

Sensor Relearn Procedure with Steering Wheel Buttons:

1. Ensure all tires are inflated to the pressures listed on the tire placard.
2. Set the Parking Brake
3. With the vehicle off, hold down the ignition button for 5 seconds
a. Do not press the brake pedal while holding down the ignition button
4. Using the streering wheel’s keypad, select “Settings,””Display Options,” then “Tire Pressure” to turn on the Tire Pressure readout display”
5. Exit the “Settings” menu and scroll to the Tire Pressure Screen.
6. Hold down the SEL/Checkmark/ or scroll‐wheel until the horn sounds twice.
7. Starting with the LF tire, use your TPMS Scan Tool to scan each sensor in the following order: LF, RF, RR and LR. The horn will chirp, after the vehicle has received a signal from each sensor. After activating the LR tire, the horn will chirp twice signifying the relearn is complete.
8. Shut the vehicle off.

CADILLAC TPMS RESET INSTRUCTION 7

A relearn magnet, or another properly formatted TPMS scan tool, is required to perform this procedure.

Relearn Procedure.

1. Inflate all tires to pressure listed on the placard.
2. Turn ignition to the ON/RUN position with the engine OFF.
3. Using the keyless entry (key fob), press and hold both the lock and the unlock buttons simultaneously until the horn sounds.
4. Starting with the left front tire, place the relearn magnet over valve stem until the horn sounds.
5. After the horn chirp has sounded, proceed as in step 4 for the next three sensors in the following order: RF, RR, and LR. The horn will sound after each activation. After activating the LR sensor, the horn will sound twice signifying the relearn is complete.
6. Turn the ignition switch to OFF to exit the relearn mode.