HOW TO RESET THE TPMS ON AUDI Q7
STORING TIRE PRESSURE VALUES
NOTE:
Saving of tire pressures must be started after each deliberate change to specified values.
After storing, the Tire Pressure Monitoring System measures the current tire pressures and saves these as the new specified values. If the changed tire pressures are not displayed in the MMI display, then it is necessary to drive a short distances so that the tire sensor signal is received again.
Proceed as follows.
- Switch ignition on.
- Press “CAR” function button in MMI operating system.
- In “Car Menu” , select sub-point “Systems”.
- Select “Tire Pressure Monitoring System”.
- Select “Save tire pressures”.