2011-2020 Ford F-250 Oil Life Reset

2011-2020 Ford F-250 Oil Life Reset

by

2011-2020 Ford F-250 Oil Life Reset

2011-2016 Ford F-250 Oil Reset

Without Message Center

2011-2016 Ford F-250 Driver Information Display 1

 

OIL LIFE RESET

Displays the remaining oil life. An oil change is required whenever indicated by the information display and according to the recommended maintenance schedule. USE ONLY RECOMMENDED ENGINE OILS.
To reset the oil monitoring system to 100% after each oil change, perform the following:
  1. Press and release the SETUP button to display OIL LIFE XXX% HOLD RESET = NEW.
  1. Press and hold the RESET button for two seconds and release to reset the oil life to 100%.
Note:  To change oil life 100% value (if equipped with this feature) to another value, proceed to Step 3.
  1. Once OIL LIFE SET TO XXX% is displayed, release and press the RESET button to change the Oil Life Start Value. Each release and press will reduce the value by 10%.

 

With Message Center

2011-2016 Ford F-250 Driver Information Display 2

With Message Center

  1. Turn the ignition to the “RUN” position.
  2. Use the controls on the left of the steering wheel to scroll through the menu.
  3. Press the up and down arrow buttons to select “SETTINGS” and then “VEHICLE”.
  4. Select “OIL LIFE RESET %” and then “OK” to reset.
  5. Turn the ignition off.

2017-2020 Ford F-250 Oil Life Reset

2017-2020 Ford F-250 Driver Information Display

OIL LIFE RESET

  1. Turn the ignition to the “on” position, but do not start the engine.
  2. Press the RIGHT ARROW button on the directional pad on the steering wheel and scroll to the SETTINGS tab
  3. Scroll down and select ADVANCED SETTINGS/CONVENIENCE
  4. Select VEHICLE
  5. Select OIL LIFE RESET
  6. Push and hold OK BUTTON until it resets completely
  7. Turn off the ignition and then restart the engine

 

Than you very much! Source: Ford F-250 Owners manual