2003-2019 Lincoln Cars TPMS Reset Instruction
TPMS Reset for the Following Lincoln Model
- Lincoln Continental 2017-2019
- Lincoln Continental 2017
- Lincoln MKC 2015-2016
- Lincoln MKC 2017-2019
- Lincoln MKC 2017-2018
- Lincoln MKZ 2017-2018
- Lincoln Mark LT 2007-2008
- Lincoln MKS 2009-2010
- Lincoln MKS 2011-2015
- Lincoln MKS 2016-2017
- Lincoln MKT 2010
- Lincoln MKT 2011-2015
- Lincoln MKX 2007
- Lincoln MKX 2008-2010
- Lincoln MKX 2011-2015
- Lincoln MKZ 2007-2008
- Lincoln MKZ 2009
- Lincoln MKZ 2010-2019
- Lincoln Nautilus 2019
- Lincoln Navigator 2007-2010
- Lincoln Navigator 2011-2019
- Lincoln Town Car 2006-2010
- Lincoln Town Car 2011
- Lincoln Town Car 2012
- Lincoln Aviator 2003-2005
- Lincoln MKS 2016
- Lincoln MKT 2016-2019
- Lincoln MKX 2016-2019
- Lincoln Navigator 2003-2004
- Lincoln Navigator 2005-2006
Lincoln TPMS Reset
Procedure using another Properly Formatted TPMS Scan Tool
Relearn Procedure for Models WITH STANDARD IGNITION.
- Inflate all tires to pressure listed on vehicle placard.
- Turn ignition to OFF position and press and release brake pedal.
- Cycle ignition from the OFF to RUN position 3 times, ending in the RUN position.
- Press and release brake pedal.
- Turn ignition to OFF position.
- Cycle ignition from the OFF to RUN position 3 times, ending in the RUN position.
- Horn will sound once, and the TPMS telltale will blink once, indicating train mode is initiated. If equipped with a message center, it will display TRAIN LF TIRE.
- Starting with the LF tire, use your TPMS scan tool to scan each sensor in the following order: LF, RF, RR, LR (and full size spare if equipped). The horn will sound once each sensor has been recognized.
- After training LR tire, the message center will display TRAINING MODE COMPLETE. If the vehicle is not equipped with the message center display, successful completion can be verified by turning the ignition to the OFF position and not hearing the horn sound. If the horn sounds, then the training procedure must be repeated.
- Turn ignition to the OFF position. <>
- Inflate all tires to pressure listed on vehicle placard.
- With the vehicle off, press and release the brake pedal.
- Press, and hold, the START button until a chime sounds.
- Power OFF by pushing the button 1 time.
- Press, and hold, the START button until a chime sounds.
- Power OFF by pushing the button 1 time.
- Press, and hold, the START button until a chime sounds.
- Press and release the brake pedal.
- Power OFF by pushing the button 1 time.
- Press, and hold, the START button until a chime sounds.
- Power OFF by pushing the button 1 time.
- Press, and hold, the START button until a chime sounds.
- Power off by pushing the button 1 time.
- Press, and hold, the START button until a chime sounds.
- Horn will sound once, and the TPMS telltale will blink once, indicating train mode is initiated. If equipped with a message center, it will display TRAIN LF TIRE.
- Starting with the LF tire, use your TPMS scan tool to scan each sensor in the following order: LF, RF, RR, LR (and full size spare if equipped). The horn will sound once each sensor has been recognized.
- After training LR tire, the message center will display TRAINING MODE COMPLETE. If the vehicle is not equipped with the message center display, successful completion can be verified by turning the ignition to the OFF position and not hearing the horn sound. If the horn sounds, then the training procedure must be repeated.
- Turn ignition to the OFF position. <>
Relearn Procedure for Models WITH PUSH-BUTTON IGNITION.