Oldsmobile Aurora 2001-2003 Oil Change Reminder Reset


Oldsmobile Aurora 2001-2002-2003 Oil Change Reminder Reset. Oldsmobile Aurora Oil reset instruction guide.

The Driver Information Center (DIC) will display a CHANGE OIL message when an oil change is due. The instrument cluster may also have a CHANGE OIL light. To reset the oil life monitor:


  1. Turn ignition switch to RUN position, with engine off.
  2. Press the TRIP (on some models SELECT or SET/RESET) button, located on the DIC, until the OIL LIFE display appears. Message will display percentage of oil life remaining. NOTE: On models without DIC buttons, use the TRIP/ODOMETER reset stem.
  3. Press and hold SET/RESET button (on some models, the check-symbol button) on DIC for at least 5 seconds. The message will change to indicate that the Oil Life has been reset. On some models, 3 chimes will also sound.
  4. Turn ignition off.
  5. Turn the key to OFF. If the light or message comes back on when you start your vehicle, the oil life system has not reset. Repeat the procedure.

NOTE: On some models, if oil life system does not reset, try turning ignition OFF after displaying oil life message. Then press and hold reset button.

Alternate Method (Some Models)

  1. Turn the ignition key to RUN with the engine off.
  2. Fully press the release the accelerator pedal 3 times within 5 seconds. Several beeps sound. This confirms the oil life system has been reset.
  3. If the CHANGE/OIL message comes back on when you start the engine, the engine oil life system has not been reset. Repeat the procedure.


Daghan Salamat higala sa Pagbisita !