Nissan DTC P2A00 A/F SENSOR 1
P2A00 A/F SENSOR 1
The air fuel ratio (A/F) sensor 1 is a planar one-cell limit current sensor. The sensor element of the A/F sensor 1 is composed an electrode layer, which transports ions. It has a heater in the element. The sensor is capable of precise measurement = 1, but also in the lean and rich range. Together with its control electronics, the sensor outputs a clear, continuous signal throughout a wide range. The exhaust gas components diffuse through the diffusion layer at the sensor cell. An electrode layer is applied voltage, and this current relative oxygen density in lean. Also this current relative hydrocarbon density in rich. Therefore, the A/F sensor 1 is able to indicate air fuel ratio by this electrode layer of current. In addition, a heater is integrated in the sensor to ensure the required operating temperature of about 800°C (1,472°F)
Nissan DTC P2A00 A/F SENSOR 1
Nissan DTC P2A00 A/F SENSOR 1
This Guide Applicable to the following Nissan Model
- 2014 – 2015 Nissan Pathfinder Hybrid
- 2016 only Nissan Murano Hybrid
- 2014 – 2017 Infiniti QX60 Hybrid
- 2005–present Nissan Serena
- 2005–present Renault Samsung SM5
- 2005–2012 Nissan Bluebird Sylphy
- 2006–present Renault Clio
- 2007–present Nissan X-Trail
- 2007–present Nissan Qashqai
- 2007–2012 Nissan Sentra
- 2007–present Renault Laguna
- 2008–2014 Nissan Teana(J32)
- 2008–present Renault Safrane
- 2008–2016 Renault Mégane(III)
- 2009–present Renault Scénic
- 2009–present Renault Fluence
- 2009–present Renault Samsung SM3
- 2009–present Renault Latitude
- 2013–present Nissan NV200
- 2013–present Nissan Sentra