Hyundai How To Reset TPMS (Tire Pressure Monitoring System)

Hyundai How To: Reset TPMS (Tire Pressure Monitoring System)

How to reset the TPMS (Tire Pressure Monitoring System) on Hyundai car Model: Accent, Azera, Elantra, Elantra Coupe, Elantra GT, Entourage, Equus, Genesis, Genesis Coupe, Santa Fe, Santa Fe Sport, Sonata, Tiburon, Tucson, Veloster, Veracruz, Ioniq.

Note: Your need TPMS scan tool, is required to perform this procedure.

TPMS Reset Instruction

Relearn Procedure when Replacing a Sensor

  1. Inflate all tires to the pressure listed on the vehicle placard.
  2. Starting with the LF tire, use the scan tool to scan each sensor in the following order: LF, RF, RR, LR (and full size spare if equipped).
  3. Turn ignition to the ON position with the engine OFF (not the ACC position).
  4. Connect the scan tool to the OBDII port and upload the sensor IDs.
  5. Turn the ignition to the OFF position. Re‐scan each sensor.
  6. Drive the vehicle above 30mph for at least 10 minutes and monitor the low tire.

Note: These vehicles utilize two types of TPMS; lo‐line and hi‐line. Hi‐line systems show the driver individual tire positions and air pressures of all tires. Lo‐line systems do not show individual tire positions and only alter that one of the 4 tires is under inflated. Some models switched systems mid‐year, so be aware of the type of TPMS you are servicing.

 

OBDII Errors If you see an error on the screen while performing an OBDII Relearn, check to make sure that the vehicle is in the ON position (not ACC). Also make sure all the connections are secure.

Errors E1 and E2 Reading Communication Errors Make sure vehicle is ON and not ACC Check for secure connection.

Errors E3 and E6 ‐ Writing Communication Errors Make sure vehicle is ON and not ACC Check for secure connection.

Error E4 – Wrong Set Error Many Lexus vehicles can store more than one set of TPMS ID’s in ECU. Toggle the vehicles selected set to the MAIN set. Then retry OBDII Relearn.

Error E5 ‐ Spare Tire Error If you receive this error, and you did not upload a sensor ID for the spare, then this vehicle requires a spare. If you did upload a spare, but you received this error, then the vehicle does not store the ID in the ECU for the spare tire.

 

This  Tutorial will work for the Following Hyunda Year and Model.

  • Accent 2006-2007
  • Accent 2008-2011
  • Accent 2012-2013
  • Accent 2014
  • Accent 2015-2017
  • Azera 2007-2011
  • Azera 2012-2017
  • Elantra 2007-2008
  • Elantra 2009-2010
  • Elantra 2011-2012
  • Elantra 2013
  • Elantra 2014-2016
  • Elantra 2017-2018
  • Elantra Coupe 2013-2014
  • Elantra GT 2013
  • Elantra GT 2014-2018
  • Entourage 2007-2010
  • Equus 2011-2013
  • Equus 2014-2016
  • Genesis 2009-2014
  • Genesis 2015-2017
  • Genesis Coupe 2010-2012
  • Genesis Coupe 2013-2015
  • Santa Fe 2007
  • Santa Fe 2008
  • Santa Fe 2009
  • Santa Fe 2010-2012
  • Santa Fe 2013-2014
  • Santa Fe 2015-2017
  • Santa Fe Sport 2013-2014
  • Santa Fe Sport 2015-2017
  • Sonata 2007
  • Sonata 2008
  • Sonata 2009-2010
  • Sonata 2011-2014
  • Sonata 2014
  • Sonata 2015-2017
  • Sonata 2015-2018
  • Tiburon 2007-2008
  • Tucson 2007-2009
  • Tucson 2010
  • Tucson 2011-2014
  • Tucson 2015
  • Tucson 2016-2017
  • Veloster 2012-2017
  • Veracruz 2007
  • Veracruz 2008
  • Veracruz 2009-2012
  • Ioniq 2017

 

Thank you very much for visiting my website!

 

By erwincsalarda

Hello, my name is Erwin Salarda, and I'm from the Philippines. My main interests are computers and automobiles, and I am very enthusiastic about learning new things in life. Everything on my website was created with the intention of sharing it with you.

One thought on “Hyundai How To: Reset TPMS (Tire Pressure Monitoring System)”

Comments are closed.