Toyota Sequoia tpms reset

How to Reset and Relearn the TPMS on Toyota Sequoia

by

How to Reset and Relearn the TPMS on Toyota Sequoia

Learn how to reset and relearn the Tire Pressure Monitoring System (TPMS) on your Toyota Sequoia with this easy guide. Proper tire pressure is crucial for safety and performance. Follow simple steps for each generation of Sequoia, and find tips for maintaining tire health. Ensure your TPMS works well to avoid issues like low tire pressure warnings. Keep your family safe on the road!<>

The Tire Pressure Monitoring System (TPMS) is an important safety feature on modern vehicles like the Toyota Sequoia that alerts the driver when tire pressure is low. If you’ve recently rotated or replaced the tires on your Sequoia, you’ll need to reset and relearn the TPMS to ensure it’s working properly. This comprehensive guide will walk you through the process for each generation of the Toyota Sequoia.<>

What is TPMS and Why is it Important?

TPMS uses wheel-mounted sensors to constantly monitor the air pressure inside each tire. If the pressure drops below a safe threshold, a warning light illuminates on the dashboard to alert the driver. Driving on underinflated tires can lead to:<>

  • Reduced fuel economy
  • Premature tire wear
  • Poor handling and longer stopping distances
  • Increased risk of tire failure

Maintaining proper tire pressure, as indicated on the tire information placard in the driver’s side doorjamb, helps optimize the Sequoia’s performance, safety and efficiency. That’s why it’s crucial to have a functioning TPMS.<>

When to Reset and Relearn TPMS

There are a few scenarios when you’ll need to reset and relearn the TPMS on your Toyota Sequoia:<>

  1. After rotating the tires
  2. When replacing one or more tires
  3. If the low tire pressure warning light remains on after inflating the tires to the proper pressure
  4. When installing winter tires or switching between tire sets

Tools Needed to Reset TPMS

Resetting the TPMS on most Sequoia models can be done without any special tools. However, on some newer models you may need a TPMS reset tool to relearn the sensor IDs. Popular TPMS tools for Toyotas include:<>

  • Autel MaxiTPMS TS501
  • ATEQ QuickSet
  • Bartec Tech400SD

Check your Sequoia’s owner’s manual to see if a reset tool is required. If you don’t have one, most auto parts stores will have one you can borrow.<>

Resetting TPMS on 1st Gen Sequoias (2001-2007)

Follow these steps to reset the TPMS on 1st generation Toyota Sequoias:<>

  1. Ensure all tires are inflated to the pressure indicated on the tire placard.
  2. Turn the ignition to the “On” position without starting the engine.
  3. Press and hold the TPMS reset button, located under the steering wheel, until the tire pressure warning light blinks 3 times.
  4. Start the engine and wait 20 minutes for the system to refresh. The warning light should turn off when the process is complete.
  5. If the light remains on, drive the vehicle at 25 mph or more for at least 10 minutes.

Resetting TPMS on 2nd Gen Sequoias (2008-2022)

The process is very similar on 2nd generation Sequoias:<>

  1. Set all tires to the recommended pressure.
  2. Turn the ignition to “On” mode.
  3. Press and hold the TPMS reset button until the warning light blinks 3 times, then release it.
  4. Start the vehicle and drive at over 25 mph for about 10 minutes to complete the relearn process.

On some 2nd gen models, you may need to use a TPMS tool to relearn the sensor IDs:<>

  1. Connect the TPMS tool to the OBD-II port under the dash.
  2. Select “Relearn” then “OBD Relearn” from the tool’s menu.
  3. Start the relearn process and wait for it to complete.
  4. Disconnect the tool and drive the vehicle to finalize the relearn.

Resetting TPMS on 3rd Gen Sequoias (2023+)

The 3rd generation Sequoia uses a new Auto Locating feature that greatly simplifies the TPMS reset process:<>

  1. Inflate all tires to the proper pressure.
  2. Drive the vehicle at 25 mph or more for about 10 minutes.
  3. The TPMS will automatically relearn the sensor positions. No additional action is needed.

Tips for Maintaining Proper Tire Pressure

To keep your Sequoia’s TPMS functioning optimally and avoid low tire pressure warnings, follow these tips:<>

  • Check tire pressure monthly. Use a quality tire gauge to check the pressure when the tires are cold, before driving for the day.
  • Adjust pressure for load and speed. Consult the owner’s manual for recommended pressures when towing, hauling heavy loads, or driving at high speeds.
  • Inspect tires regularly. Look for signs of uneven wear, damage, or foreign objects in the tread.
  • Rotate tires as scheduled. Regular rotations promote even wear. Reset the TPMS after each rotation.
  • Replace TPMS sensors as needed. The batteries in TPMS sensors typically last around 10 years. If the system starts having trouble receiving signals from a sensor, it likely needs to be replaced.

Troubleshooting TPMS Problems

If you’re having issues with your Sequoia’s TPMS not resetting or working properly, here are some things to check:<>

Warning Light Flashes, Then Stays On

A flashing tire pressure warning light that then remains illuminated indicates a problem with the TPMS itself. It could be a malfunctioning sensor or an issue with the TPMS module. A scan tool can read trouble codes to help diagnose the problem.<>

Warning Light Comes On While Driving

If the tire pressure warning light comes on while you’re driving, safely pull over and check the pressure in all tires. If any are low, use a tire inflator or compressor to add air. The light should go off once all tires are properly inflated. If the light remains on, there may be a leak or TPMS malfunction.<>

TPMS Won’t Relearn After Tire Rotation

If you’ve rotated the tires and are performing a TPMS relearn, make sure you start the process with the driver’s front tire, then go to the passenger front, passenger rear, driver rear, and spare tire (if equipped). Some early Sequoia models can only relearn 4 sensor IDs, so you may need to skip the spare. Driving at speed for several minutes also helps complete the relearn process.<>

The Importance of Proper Tire Maintenance

While TPMS is a fantastic safety aid, it’s not a replacement for regular tire care. Checking tire pressure, tread depth, and overall condition should be part of your normal maintenance routine. This helps ensure your Sequoia’s tires deliver optimal performance, safety, and longevity.<>

If you’re unsure about checking tire pressure or performing a TPMS reset, consult your owner’s manual or contact your local Toyota dealer for assistance. Properly maintained tires and a functional TPMS help keep you and your passengers safe on the road.<>

By following the steps outlined in this guide, you should be able to easily reset and relearn the TPMS on your Toyota Sequoia, no matter the generation. Remember to check tire pressure regularly and address any TPMS warning lights promptly to ensure your tires are always in top shape. Safe travels!<>

 

<>