How to Reset and Relearn the TPMS of Toyota Aurion in All Generations

How to Reset and Relearn the TPMS of Toyota Aurion in All Generations

Learn how to reset and relearn the Tire Pressure Monitoring System (TPMS) for all generations of the Toyota Aurion (2006-2017) with our comprehensive guide. Understand the importance of TPMS for vehicle safety and performance, and follow step-by-step instructions tailored for both first and second-generation models. Discover troubleshooting tips, maintenance advice, and the significance of proper tire inflation. Ensure your Aurion remains safe and efficient on the road while enhancing its resale value. Perfect for Toyota Aurion owners looking to optimize their driving experience!

The Toyota Aurion, a popular mid-size car produced by Toyota between 2006 and 2017, comes equipped with a Tire Pressure Monitoring System (TPMS) to ensure optimal tire performance and safety. Understanding how to reset and relearn this system is crucial for maintaining your vehicle’s performance and safety. This comprehensive guide will walk you through the process for all generations of the Toyota Aurion.

Understanding TPMS in Toyota Aurion

Before diving into the reset and relearn procedures, it’s essential to understand what TPMS is and why it’s important.

What is TPMS?

TPMS is a safety feature that monitors the air pressure inside the tires. It alerts the driver when one or more tires are significantly under-inflated, potentially creating unsafe driving conditions.

Why is TPMS Important?

Proper tire inflation is crucial for:

• Optimal vehicle handling
• Fuel efficiency
• Tire longevity
• Overall safety

TPMS Types in Toyota Aurion

Toyota Aurion models typically use one of two types of TPMS:

1. Direct TPMS: Uses sensors inside each tire to measure pressure directly
2. Indirect TPMS: Uses wheel speed sensors from the ABS system to detect under-inflation

Knowing which system your Aurion uses is crucial for proper reset and relearn procedures.

Resetting TPMS in Toyota Aurion: General Procedure

While specific steps may vary slightly between generations, here’s a general procedure for resetting the TPMS in Toyota Aurion models:

1. Ensure all tires, including the spare, are properly inflated to the recommended pressure
2. Turn the ignition to the “ON” position without starting the engine
3. Locate the TPMS reset button (usually under the steering wheel or in the glove compartment)
4. Press and hold the reset button until the TPMS light blinks three times
5. Release the button
6. Start the engine and wait for about 20 minutes
7. The TPMS light should turn off, indicating a successful reset

TPMS Reset and Relearn for Different Aurion Generations

Let’s break down the process for each generation of the Toyota Aurion.

First Generation Aurion (2006-2012)

The first-generation Aurion typically uses an indirect TPMS system.

Reset Procedure:

1. Inflate all tires to the correct pressure
2. Turn the ignition to “ON”
3. Press and hold the TPMS reset button until the TPMS light flashes three times
4. Start the engine and drive for at least 10 minutes at speeds above 16 mph (25 km/h)
5. The system will calibrate during this drive

Second Generation Aurion (2012-2017)

The second-generation Aurion often uses a direct TPMS system, which requires a slightly different approach.

Reset and Relearn Procedure:

1. Ensure all tires are properly inflated
2. Turn the ignition to “ON” without starting the engine
3. Press and hold the TPMS reset button until the TPMS light blinks three times
4. Start the engine and drive the vehicle for at least 20 minutes at speeds above 25 mph (40 km/h)
5. The system will relearn the new sensor IDs during this drive

Troubleshooting TPMS Issues in Toyota Aurion

If you encounter problems during the reset or relearn process, consider these common issues and solutions:

Maintaining Your Aurion’s TPMS

To ensure your TPMS functions correctly:

• Check tire pressure monthly, including the spare
• Have TPMS sensors checked during routine maintenance
• Replace TPMS sensor batteries every 5-7 years
• Be cautious when rotating tires or changing wheels

When to Seek Professional Help

While many TPMS resets can be performed at home, certain situations require professional assistance:

• Persistent TPMS warning light after reset attempts
• Suspicion of faulty TPMS sensors
• Need for TPMS sensor replacement or reprogramming
• Uncertainty about your specific Aurion model’s TPMS type

The Importance of Correct Tire Pressure

Maintaining correct tire pressure is crucial not only for the proper functioning of your TPMS but also for:

• Improved fuel efficiency
• Extended tire life
• Better handling and braking performance
• Reduced risk of tire failure

Always refer to your Aurion’s owner’s manual or the tire pressure placard (usually located on the driver’s side door jamb) for the correct tire pressure values.

TPMS and Tire Rotation

When rotating tires on your Toyota Aurion, keep in mind:

1. Some TPMS sensors are position-specific and may need to be reprogrammed after rotation
2. Always reset the TPMS after tire rotation
3. If your Aurion uses a direct TPMS, consider having a professional perform the rotation to ensure proper sensor positioning

TPMS and Seasonal Tire Changes

For Aurion owners who switch between summer and winter tires:

• Ensure both sets of tires have compatible TPMS sensors
• Reset and relearn the TPMS after each seasonal change
• Consider using a separate set of wheels with pre-installed sensors for easier swaps

The Future of TPMS Technology

While the Toyota Aurion production ended in 2017, it’s worth noting the advancements in TPMS technology that may affect future Toyota models:

• Integration with smartphone apps for real-time tire pressure monitoring
• More accurate pressure readings with temperature compensation
• Extended battery life in TPMS sensors
• Integration with advanced driver assistance systems (ADAS)

Legal Requirements and TPMS

It’s important to note that in many countries, including the United States, functional TPMS is a legal requirement for vehicles manufactured after a certain date. While the Toyota Aurion was primarily sold in Australia and some Asian markets, owners should be aware of local regulations regarding TPMS, especially if importing or exporting vehicles.

Common Misconceptions About TPMS

Let’s address some common misconceptions about TPMS in the Toyota Aurion:

TPMS and Vehicle Safety Systems

The TPMS in your Toyota Aurion works in conjunction with other safety systems:

• Anti-lock Braking System (ABS)
• Electronic Stability Control (ESC)
• Traction Control System (TCS)

Proper tire inflation, as monitored by TPMS, ensures these systems function optimally, contributing to overall vehicle safety.

Environmental Impact of Proper Tire Inflation

Maintaining correct tire pressure through effective use of TPMS has environmental benefits:

• Reduced fuel consumption
• Lower carbon emissions
• Extended tire life, reducing waste

TPMS and Vehicle Resale Value

A well-maintained TPMS can positively impact your Aurion’s resale value:

• Demonstrates good overall vehicle maintenance
• Ensures compliance with safety regulations
• Provides peace of mind to potential buyers

Conclusion

Understanding how to reset and relearn the TPMS in your Toyota Aurion is crucial for maintaining your vehicle’s safety, performance, and efficiency. While the process may vary slightly between generations, the general principles remain the same. Regular maintenance, proper tire inflation, and prompt attention to TPMS warnings will ensure your Aurion continues to provide a safe and comfortable driving experience.

Remember, when in doubt, always consult your vehicle’s owner’s manual or seek assistance from a qualified Toyota technician. Proper use and maintenance of your TPMS not only enhance your safety but also contribute to better fuel efficiency and reduced environmental impact.

By following the guidelines outlined in this comprehensive guide, you’ll be well-equipped to manage your Toyota Aurion’s TPMS effectively, ensuring optimal performance and safety for years to come.