How to Reset and Relearn the TPMS of Nissan Qashqai in All Generations

How to Reset and Relearn the TPMS of Nissan Qashqai in All Generations

Our thorough guide will help you to efficiently reset and relearn the Tire Pressure Monitoring System (TPMS) for every model of the Nissan Qashqai. Discover the distinctions between direct and indirect TPMS systems, step-by-step reset techniques for models up to 2016 and from 2016 forward, and other reset techniques. We also address best practices for TPMS maintenance, troubleshooting advice, and the need of keeping appropriate tire pressure for better vehicle performance and safety. Mastering your TPMS now can help you guarantee that your Nissan Qashqai functions safely and fault-free.<>

The Tire Pressure Monitoring System (TPMS) is a crucial safety feature in modern vehicles, including the Nissan Qashqai. It helps drivers maintain proper tire pressure, which is essential for optimal vehicle performance, fuel efficiency, and safety. In this comprehensive guide, we’ll explore how to reset and relearn the TPMS for all generations of the Nissan Qashqai, providing you with expert knowledge to maintain your vehicle’s tire pressure monitoring system effectively.<>

Understanding TPMS in Nissan Qashqai

Before diving into the reset and relearn procedures, it’s important to understand the two types of TPMS used in Nissan Qashqai models:<>

  1. Direct TPMS: Uses sensors attached to the valve to monitor air pressure inside the tire and relay information to the dashboard or infotainment system.
  2. Indirect TPMS: Monitors all tires but only warns if one tire is losing pressure. It uses complex calculations to measure the rolling radius of the tire through the ABS system.

Knowing which system your Qashqai uses is crucial for following the correct reset and relearn procedures.<>

TPMS Reset and Relearn Procedures for Different Qashqai Generations

Qashqai Models up to 2016 (Indirect System)

For older Nissan Qashqai models with the indirect TPMS system, follow these steps:<>

  1. Ensure the vehicle is stopped in a safe location and check current tire pressures.
  2. Turn the ignition key to ‘ON’ without starting the engine. For smart key systems, press the ‘Start’ button twice.
  3. Enter the settings menu on the dashboard using the up and down arrows on the steering wheel.
  4. Scroll to “MAINTENANCE” and press enter.
  5. Scroll to “TYRE PRESSURE” and select “CALIBRATE”.
  6. Start the calibration process.

Qashqai Models from 2016 Onwards (Direct System)

For newer Qashqai generations with the direct TPMS system, follow this procedure:<>

  1. Park the vehicle in a safe location and check current tire pressures.
  2. Turn the ignition key to the ‘ON’ position without starting the engine.
  3. Use the arrow keys to scroll through the infotainment display and select “SETTINGS”.
  4. Navigate to “MAINTENANCE” and press enter.
  5. Select “TYRE PRESSURE” and then “CALIBRATE”.
  6. Initiate the calibration process.

TPMS Sensor ID and Position Recognition

For both older and newer Qashqai models, the following procedure can be used to register new TPMS sensors or recognize sensor positions after tire rotation:<>

  1. Change tire position or have new TPMS sensors fitted.
  2. Park the vehicle with the ignition ON or engine running for more than 20 minutes. This step must be performed before driving.
  3. Drive the vehicle for several minutes between 25 km/h (16 MPH) and 100 km/h (64 MPH). The TPMS sensor ID and position will be automatically detected.

Important Notes:

  • The TPMS might not synchronize if driving conditions are poor, if the TPMS unit doesn’t receive correct data from sensors, or if driving speed is outside the specified range.
  • Avoid high acceleration, high deceleration, and stop-and-go traffic during the relearn process.

Alternative TPMS Reset Methods

The Driving Method

One of the simplest ways to reset a Nissan’s TPMS light is by driving:<>

  1. Ensure all tires are properly inflated to the recommended pressure.
  2. Drive the vehicle at 50 mph or above for 10 minutes.
  3. The next time you restart your Nissan, the TPMS sensor should be reset.

The Refill Method

If the driving method doesn’t work, try this three-step process recommended by Nissan dealers:<>

  1. Inflate your tires to 3 PSI over the recommended level.
  2. Deflate your tires completely.
  3. Reinflate the tires to their recommended pressure.

Note: If you have a spare tire with a TPMS sensor, include it in this process.<>

Direct Sensor Reset

For stubborn TPMS lights, you may need to reset the sensor directly:<>

  1. Turn off the vehicle completely.
  2. Insert the key and turn it to the “on” position without starting the engine. For push-button ignition, press the button once without pressing the brake pedal.
  3. Locate the TPMS reset button (usually under the steering wheel; consult your owner’s manual if unsure).
  4. Press and hold the TPMS reset button until the warning light blinks three times, then release.
  5. Start the car and wait about 20 minutes for the sensor to refresh.

Hard Reset Method

As a last resort, you can try a hard reset:<>

  1. With the car off, disconnect the battery (negative terminal first).
  2. Turn the car to the “on” position and attempt to honk the horn for about three seconds.
  3. Reconnect the battery (positive terminal first) and start the car.

Using a TPMS Reset Tool

For some Nissan models, a TPMS reset tool may be necessary. While the exact procedure can vary, here’s a general guide:<>

  1. Ensure the vehicle is in a safe location with the engine off.
  2. Locate the TPMS reset connector, usually under the dashboard near the steering column.
  3. Use a jumper wire or paperclip to connect the reset pin to ground.
  4. Turn the ignition to the “on” position without starting the engine.
  5. Tap the ground connection six times. This should trigger the TPMS light to start flashing, indicating it’s in relearn mode.

Troubleshooting TPMS Issues

If you’re experiencing persistent TPMS light issues, consider the following:<>

  • Cold Weather: Low temperatures can cause tire pressure to decrease, triggering the TPMS light.
  • Faulty Sensors: TPMS sensors have batteries that can die over time, typically lasting 5-10 years.
  • System Malfunction: If problems persist after resetting, there may be a malfunction in the TPMS system or an issue with the vehicle’s battery charging system.

Best Practices for TPMS Maintenance

To ensure your Nissan Qashqai’s TPMS functions correctly:<>

  1. Regular Checks: Perform monthly tire pressure checks using a reliable gauge.
  2. Correct Inflation: Always maintain the recommended tire pressure as specified in your vehicle’s manual.
  3. Seasonal Adjustments: Be aware of pressure fluctuations during temperature changes, especially in colder months.
  4. Professional Inspection: If you’re unable to reset the TPMS or if issues persist, seek professional assistance.

Conclusion

Maintaining proper tire pressure is crucial for your Nissan Qashqai’s performance, safety, and fuel efficiency. By understanding how to reset and relearn your vehicle’s TPMS, you can ensure this important safety feature functions correctly. Remember that while these procedures work for most Qashqai models, it’s always best to consult your specific vehicle’s manual for the most accurate information.<>

If you encounter persistent issues with your TPMS, don’t hesitate to seek professional help. A properly functioning TPMS not only enhances your vehicle’s performance but also contributes significantly to your safety on the road.<>

By following these guidelines and maintaining your TPMS, you’re taking an important step in responsible vehicle ownership, ensuring optimal performance and safety for your Nissan Qashqai across all generations.<>