Mercedes-Benz Sprinter TPMS Reset

How to Reset and Relearn the TPMS of Mercedes-Benz Sprinter in All Generations

by

How to Reset and Relearn the TPMS of Mercedes-Benz Sprinter in All Generations

For all Mercedes-Benz Sprinter generations, find out how to reset and relearn the Tire Pressure Monitoring System (TPMS). In order to maintain ideal tire pressure for safety, fuel economy, and tire longevity, this thorough guide includes necessary steps, troubleshooting advice, and best practices. Make that the TPMS on your Sprinter is operating properly following tire replacements, rotations, or sensor installs. For vehicles from 2007 to the present, follow our detailed instructions to learn the significance of appropriate TPMS maintenance. Keep your car on the road safely and effectively!<>

The Tire Pressure Monitoring System (TPMS) is a crucial safety feature in modern vehicles, including the Mercedes-Benz Sprinter. This system helps drivers maintain optimal tire pressure, ensuring better fuel efficiency, longer tire life, and improved safety on the road. However, there are times when you need to reset or relearn the TPMS, such as after tire rotations, replacements, or sensor installations. In this comprehensive guide, we’ll walk you through the process of resetting and relearning the TPMS for all generations of the Mercedes-Benz Sprinter.<>

Understanding TPMS in Mercedes-Benz Sprinter

Before diving into the reset and relearn procedures, it’s essential to understand how the TPMS works in Mercedes-Benz Sprinter vans. The system uses sensors installed in each wheel to monitor tire pressure and temperature. These sensors transmit data to the vehicle’s onboard computer, which alerts the driver if any tire’s pressure falls below the recommended level.<>

Key Components of the Sprinter TPMS:

  • Tire pressure sensors in each wheel
  • Antennas at the front and rear of the vehicle to capture sensor signals
  • Control unit under the driver’s seat
  • Instrument cluster display for alerts and information

The sensors operate on either 315MHz or 433MHz frequencies and transmit tire pressure, air temperature, acceleration, sensor ID, mode, and battery status.<>

When to Reset or Relearn TPMS

You may need to reset or relearn the TPMS in your Mercedes-Benz Sprinter in the following situations:<>

  • After changing tire pressure
  • When rotating or replacing tires
  • After installing new wheels or tires
  • When the TPMS warning light remains on after inflating tires
  • Following the installation of new TPMS sensors

General Precautions Before Resetting TPMS

Before attempting to reset or relearn the TPMS in your Mercedes-Benz Sprinter, ensure you follow these precautions:<>

  1. Inflate all tires to the pressure indicated on the tire placard, usually found on the driver’s side door jamb or fuel filler door.
  2. Ensure that all TPMS sensors are properly installed and functioning.
  3. Disable all other WiFi/Bluetooth and electronic accessory devices, including HID kits, car audio systems, navigation, and back-up cameras, as they may interfere with the TPMS signal.
  4. Park the vehicle in a safe location away from traffic.
  5. Have the vehicle’s manual handy for reference.

TPMS Reset Procedure for Mercedes-Benz Sprinter (2007-2014)

For Sprinter models from 2007 to 2014, follow these steps to reset the TPMS:<>

  1. Turn the ignition to the ON position (engine off).
  2. Press the forward/back button on the steering wheel until the trip and odometer are displayed.
  3. Press the UP/DOWN button until the tire inflation pressure monitor is displayed.
  4. Hold down the reset button (located on the instrument cluster) until “MONITOR CURRENT TIRE PRESSURE?” is displayed.
  5. Press the + button. “TYRE PRESS. MONITOR ACTIVATED-PRESS. DISPLAY AFTER DRIVING A FEW MINS.” will be displayed.
  6. If “REACTIVATE-TYRE PRESS. MONITOR!” appears, repeat the relearn procedure.
  7. If “CHECK TIRES!” appears, it indicates tire pressure is too low. Adjust pressures accordingly.
  8. Drive the vehicle for a minimum of 10 minutes to complete the relearn procedure, allowing the system to learn new sensor IDs.

TPMS Reset Procedure for Mercedes-Benz Sprinter (2015 and Later)

For newer Sprinter models (2015 and later), the process is slightly different:<>

  1. Ensure the vehicle is parked and turn the ignition to the ON position without starting the engine.
  2. Press the home button located on the left side of the steering wheel.
  3. Use the wheel’s touch-sensitive button to scroll to the right and find the “Service” menu.
  4. Hold the touch-sensitive button for three seconds until the light blinks to initiate the reset.
  5. Wait for approximately 20 minutes for the sensor to fully reset.

Auto Relearn Procedure for Mercedes-Benz Sprinter

In some cases, the Sprinter’s TPMS may automatically relearn new tire pressures without manual intervention. This auto relearn procedure typically involves:<>

  1. Confirming that TPMS sensors are properly installed
  2. Adjusting tire pressures to the placard value
  3. Activating sensors with a TPMS activation tool (if available)
  4. Driving the vehicle for up to 10 minutes

Additional Conditions for Successful TPMS Resets

To ensure a successful TPMS reset and relearn, keep these additional factors in mind:<>

  • Drive the van at more than 16 mph for at least 10 minutes after the reset to allow sensors to “wake up” and start measuring new pressures.
  • Complete the driving portion within 20 minutes of the reset, or the system may “forget” it’s been asked to reset.
  • Maintain consistent tire pressures during the relearn process. Pressures should not vary by more than 1.5 psi during this time.
  • Ensure the pressure difference between the four tires is less than 22 psi.
  • Keep the pressure in all four tires above the NHTSA minimum pressure (typically 24.9 psi for passenger vehicles, but may differ for Sprinters).

Troubleshooting TPMS Reset Issues

If you encounter difficulties resetting or relearning the TPMS in your Mercedes-Benz Sprinter, consider the following troubleshooting steps:<>

  1. Verify that all tire pressures are correct and within the specified range.
  2. Ensure that no electronic devices are interfering with the TPMS signal.
  3. Check for any error messages on the instrument cluster display.
  4. Inspect the TPMS sensors for damage or low battery.
  5. Consult your vehicle’s manual for model-specific instructions.
  6. If problems persist, consider using a professional TPMS diagnostic tool or seeking assistance from a Mercedes-Benz dealership or qualified mechanic.

Importance of Proper TPMS Maintenance

Maintaining a properly functioning TPMS in your Mercedes-Benz Sprinter is crucial for several reasons:<>

  • Safety: Properly inflated tires provide better handling, braking, and stability.
  • Fuel Efficiency: Correct tire pressure helps optimize fuel consumption.
  • Tire Longevity: Maintaining proper tire pressure extends the life of your tires.
  • Legal Compliance: Many jurisdictions require functional TPMS for vehicle operation.

TPMS Best Practices for Mercedes-Benz Sprinter Owners

To ensure optimal performance of your Sprinter’s TPMS, follow these best practices:<>

  1. Regularly check tire pressures, even with a functioning TPMS.
  2. Keep a tire pressure gauge in your vehicle for manual checks.
  3. Be aware of temperature changes that can affect tire pressure.
  4. Address TPMS warnings promptly to avoid potential safety issues.
  5. Have your TPMS sensors checked during routine maintenance.
  6. Replace TPMS sensors when their batteries are low or as recommended by Mercedes-Benz.

Conclusion

Resetting and relearning the TPMS in your Mercedes-Benz Sprinter is a straightforward process when you follow the correct procedures. By understanding how the system works and maintaining it properly, you can ensure your Sprinter’s tires are always at the optimal pressure for safety, efficiency, and longevity. Remember that while these procedures work for most Sprinter models, always consult your vehicle’s manual for model-specific instructions and seek professional assistance if you encounter persistent issues.<>

FAQs About Mercedes-Benz Sprinter TPMS

Q: How often should I reset my Sprinter’s TPMS?

A: You typically only need to reset the TPMS after changing tires, rotating them, or adjusting tire pressures. The system doesn’t require regular resets under normal conditions.<>

Q: Can I reset the TPMS without special tools?

A: In most cases, you can reset the TPMS using the vehicle’s built-in menu system and buttons. However, some procedures may require a TPMS activation tool for best results.<>

Q: Will the TPMS light turn off immediately after resetting?

A: Not always. The system may require a short drive (usually 10-20 minutes) to complete the relearn process and turn off the warning light.<>

Q: Can I ignore the TPMS warning light?

A: It’s not recommended to ignore TPMS warnings. They indicate potential safety issues that could lead to tire failure or reduced vehicle performance.<>

Q: Do I need to reset TPMS after routine tire inflation?

A: For minor pressure adjustments, the system should automatically recalibrate during normal driving. However, if you’ve made significant pressure changes, a manual reset may be necessary.<>

By following these guidelines and maintaining your Mercedes-Benz Sprinter’s TPMS, you can ensure a safer, more efficient driving experience. Always prioritize tire maintenance as part of your overall vehicle care routine, and don’t hesitate to seek professional assistance when needed.<>