2006-2010 Pontiac TPMS Reset Procedure

by

2006-2010 Pontiac TPMS Reset Procedure

TPMS Reset for the following Pontiac Car Model

  • Pontiac G3 2009-2010
  • Pontiac G5 2008
  • Pontiac G5 2009-2010
  • Pontiac G6 2008
  • Pontiac G6 2009-2010
  • Pontiac G8 2008-2009
  • Pontiac Grand Prix 2007-2008
  • Pontiac Montana 2008-2009
  • Pontiac Solstice 2008-2010
  • Pontiac Torrent 2006-2009
  • Pontiac Vibe 2008-2010
  • Pontiac Wave 2008-2009

Pontiac TPMS Reset Procedure

Procedure using another Properly Formatted TPMS Scan Tool

Relearn Procedure for Models Equipped with Keyless Entry:

  1. Inflate all tires to the pressure listed on the placard.
  2. Turn ignition to the ON/RUN position with the engine OFF (not the ACC position).
  3. Using the keyless entry (key fob), press and hold the lock and the unlock buttons simultaneously until the horn sounds.
  4. Starting with the LF tire, use a properly formatted TPMS scan tool to scan each sensor in the following order: LF, RF, RR and LR. The horn will chirp, after the vehicle has received a signal from each sensor. After activating the LR tire, the horn will chirp twice signifying the relearn is complete.
  5. Turn the ignition to the OFF position.
    6. <>

    Relearn Procedure for Models Equipped with a Driver’s Information Center (DIC):

    1. Inflate all tires to the pressure listed on the placard.
    2. Turn ignition to the ON/RUN position with the engine OFF (not the ACC position) and lower the driver’s side window.
    3. Press the Vehicle Information button (located to the left or right of the instrument cluster) repeatedly until “LEARN TIRE PRESSURES” is displayed. Then press the checkmark button.
    4. Starting with the LF tire, use a properly formatted TPMS scan tool to scan each sensor in the following order: LF, RF, RR and LR. The horn will chirp, after the vehicle has received a signal from each sensor. After activating the LR tire, the horn will chirp twice signifying the relearn is complete.
    5. Turn the ignition to the OFF position.
      6. <>

      Relearn Procedure for Models NOT Equipped with a Keyless Entry or DIC:

      1. Inflate all tires to the pressure listed on the placard.
      2. Turn ignition to the ON/RUN position with the engine OFF (not the ACC position) and lower the driver’s side window.
      3. Press the trip odometer button until “LEARN TIRE PRESSURES” is displayed. Then hold down the trip odometer button until the horn chirps.
      4. Starting with the LF tire, use a properly formatted TPMS scan tool to scan each sensor in the following order: LF, RF, RR and LR. The horn will chirp, after the vehicle has received a signal from each sensor. After activating the LR tire, the horn will chirp twice signifying the relearn is complete.
      5. Turn the ignition to the OFF position.
        6. <>