2002-2011 Mercury Car TPMS Reset Instruction

by

2002-2011 Mercury Car TPMS Reset Instruction

TPMS Reset for the following Mercury car model

  • Mercury Grand Marquis 2006-2010
  • Mercury Grand Marquis 2011
  • Mercury Grand Marquis 2011
  • Mercury Mariner 2006-2008
  • Mercury Mariner 2009-2011
  • Mercury Milan 2007-2009
  • Mercury Milan 2010-2011
  • Mercury Montego 2006-2007
  • Mercury Monterey 2004-2005
  • Mercury Monterey 2006-2007
  • Mercury Mountaineer 2002-2005
  • Mercury Mountaineer 2006-2010
  • Mercury Sable 2008-2009

 

Mercury TPMS Reset Instruction

Procedure using another Properly Formatted TPMS Scan Tool

Relearn Procedure for Models WITH STANDARD IGNITION.

  1. Inflate all tires to pressure listed on vehicle placard.
  2. Turn ignition to OFF position and press and release brake pedal.
  3. Cycle ignition from the OFF to RUN position 3 times, ending in the RUN position.
  4. Press and release brake pedal.
  5. Turn ignition to OFF position.
  6. Cycle ignition from the OFF to RUN position 3 times, ending in the RUN position.
  7. Horn will sound once, and the TPMS telltale will blink once, indicating train mode is initiated. If equipped with a message center, it will display TRAIN LF TIRE.
  8. Starting with the LF tire, use your TPMS scan tool to scan each sensor in the following order: LF, RF, RR, LR (and full size spare if equipped). The horn will sound once each sensor has been recognized.
  9. After training LR tire, the message center will display TRAINING MODE COMPLETE. If the vehicle is not equipped with the message center display, successful completion can be verified by turning the ignition to the OFF position and not hearing the horn sound. If the horn sounds, then the training procedure must be repeated.
  10. Turn ignition to the OFF position.
    11. <>

     

    Relearn Procedure for Models WITH PUSH-BUTTON IGNITION.

    1. Inflate all tires to pressure listed on vehicle placard.
    2. With the vehicle off, press and release the brake pedal.
    3. Press, and hold, the START button until a chime sounds.
    4. Power OFF by pushing the button 1 time.
    5. Press, and hold, the START button until a chime sounds.
    6. Power OFF by pushing the button 1 time.
    7. Press, and hold, the START button until a chime sounds.
    8. Press and release the brake pedal.
    9. Power OFF by pushing the button 1 time.
    10. Press, and hold, the START button until a chime sounds.
    11. Power OFF by pushing the button 1 time.
    12. Press, and hold, the START button until a chime sounds.
    13. Power off by pushing the button 1 time.
    14. Press, and hold, the START button until a chime sounds.
    15. Horn will sound once, and the TPMS telltale will blink once, indicating train mode is initiated. If equipped with a message center, it will display TRAIN LF TIRE.
    16. Starting with the LF tire, use your TPMS scan tool to scan each sensor in the following order: LF, RF, RR, LR (and full size spare if equipped). The horn will sound once each sensor has been recognized.
    17. After training LR tire, the message center will display TRAINING MODE COMPLETE. If the vehicle is not equipped with the message center display, successful completion can be verified by turning the ignition to the OFF position and not hearing the horn sound. If the horn sounds, then the training procedure must be repeated.
    18. Turn ignition to the OFF position.
      19. <>