HOW TO GUIDE: Toyota SEQUOIA Keyfob RKE Programming

Toyota SEQUOIA Keyfob RKE Programming Instructions

Quick and easy instructions with a step-by-step tutorial on how to program the RKE Keyfob on a Toyota Sequoia manufactured in 2011, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012 to 2013.

How to Program RKE Keyfob Honda Toyota Sequoia 2001-2013

  1. Prepare Vehicle

    With the key OUT of the Ignition, OPEN and UNLOCK the Driver’s door.

  2. Enter Programming Mode – Step 1

    INSERT key into Ignition (Do NOT turn it) and REMOVE key.

  3. Enter Programming Mode – Step 2

    PERFORM the following steps WITHIN 40 seconds:

    a. Using the power lock switch on the driver’s door, perform 5 lock/unlock cycles starting with lock. Use an even pace and try to go about one cycle per second (1 Cycle = 1 lock and 1 unlock).

    b. CLOSE then OPEN Driver’s door.

  4. Enter Programming Mode – Step 3

    PERFORM the following steps WITHIN 40 seconds:

    a. Using the power lock switch on the driver’s door, perform 5 lock/unlock cycles starting with lock. Use an even pace and try to go about one cycle per second (1 Cycle = 1 lock and 1 unlock).

    b. INSERT key into Ignition.

    c. TURN ignition to ON (Do NOT Start) then back to OFF.
    – Do this ONCE to retain existing remotes programmed.
    – Do this TWICE to ERASE all existing remotes programmed and ADD NEW remote.
    – Do this THREE times to CHECK how many remotes are programmed to the vehicle.
    – Do this FIVE times to ERASE all existing remotes programmed.

    d. REMOVE key from Ignition.

  5. Enter Programming Mode – Step 4

    WITHIN 3 seconds the Power Door Locks should cycle LOCK/UNLOCK to signal successful entry into Programming Mode.

  6. Program Remote

    PERFORM the following steps WITHIN 40 seconds:

    a. PRESS the LOCK and UNLOCK buttons on the remote simultaneously for 1 second.

    b. PRESS and HOLD the LOCK button for 2 seconds. The Door Locks will cycle LOCK/UNLOCK to indicate successful programming of the remote.

  7. Program Additional Remotes

    REPEAT Steps 6a and 6b for any additional remotes to be programmed.

  8. EXIT Programming Mode

    CLOSE Driver’s Door to EXIT Programming Mode.

  9. Test Remotes

    TEST all remotes. Programming is complete.

Programming Notes:

  • Verify the following prior to following these instructions:
    • Your vehicle is equipped with keyless entry, and
    • You have a key fob remote that is compatible with your vehicle.
  • Obtain ALL remote transmitters for this vehicle.
  • If you have a remote head key with a transponder chip, this procedure will ONLY program the remote portion. You’ll need a Professional Auto Locksmith to cut and program the transponder key that will start the vehicle.
  • If you have a remote head key without a transponder chip, this procedure WILL work for your vehicle.
  • This procedure DOES NOT work for smart proximity remote key fobs.

Toyota Sequoia 2013-2022 RKE Keyfob Programming

You will need an OBD 2 scan tool that contains the keyfob/RKE programming feature in order to correctly program the RKE key fob on a Toyota Sequoia from the model years 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, or 2022.

About this Blog

How to Program the Key Fob for Your Toyota Sequoia: Step-by-Step Instructions This guide will walk you through the process of programming the key fob for your Toyota Sequoia. Programming Your Key Fob Is Now Easier Than Ever: A Guide for Your Toyota Sequoia, The Complete and Comprehensive Guide on Programming Your Key Fob for Your Toyota Sequoia, How to Get the Most Out of the Key Fob That Comes With Your Toyota Sequoia, A Step-by-Step Tutorial for Newbies on How to Program the Key Fob in Your Toyota Sequoia