GM Cars Key Fob Programming Instruction Guide

GM Cars Key Fob Programming Instruction Guide

This Key Fob programming instruction will only work for the following Car Model

  • 2008 Buick Enclave
  • 2007-2007 Cadillac Escalade EXT
  • 2007-2010 Chevrolet Avalanche
  • 2007-2009 Chevrolet Equinox
  • 2010-2010 Chevrolet Express 3500
  • 2007-2010 Chevrolet HHR
  • 2007-2010 Chevrolet Silverado 1500
  • 2007-2010 Chevrolet Silverado 2500 HD
  • 2007-2010 Chevrolet Silverado 3500 HD
  • 2008-2010 Chevrolet Suburban 1500
  • 2008-2010 Chevrolet Tahoe
  • 2010 Chevrolet Traverse
  • 2007-2010 GMC Acadia
  • 2010 GMC Savana 3500
  • 2007-2010 GMC Sierra 1500
  • 2007-2010 GMC Sierra 2500 HD
  • 2007-2010 GMC Sierra 3500 HD
  • 2008-2010 GMC Yukon
  • 2008-2010 GMC Yukon XL 1500
  • 2008-2009 Hummer H2
  • 2007-2009 Pontiac Torrent
  • 2007-2010 Saturn Outlook

 

Keyfob Programming

keyfob programming

 

FOR VEHICLES WITHOUT DRIVER INFORMATION CENTER (DIC):

  1. To access this display, the vehicle must be in P(Park).
  2. Press the trip odometer reset stem until RELEARN REMOTE KEY displays.
  3. Press and hold the trip odometer reset stem until REMOTE KEY LEARNING ACTIVE is displayed.
  4. Press and hold the lock and unlock buttons on the first transmitter at the same time for about 15 seconds. On vehicles with memory recall seats, the first transmitter learned will match driver 1 and the second will match driver 2. A chime will sound indicating that the transmitter is matched.
  5. To match additional transmitters at this time, repeat Step 3. Each vehicle can have a maximum of eight transmitters matched to it.
  6. To exit the programming mode, you must cycle the key to LOCK/ OFF.

 

Thank you Very Much! 🙂