MG ZS Wheel Alignment Specifications
Optimize the fuel efficiency and management of your MG ZS by adhering to precise wheel alignment specifications. Identify the critical alignment parameters, tire pressure, and wheel dimensions for both the front and rear wheels. For optimal safety and performance, it is advised to conduct routine inspections and consult with a professional.<>
Wheel Alignment Parameters (Unladen Condition)
Front Wheel Alignment
- Camber angle: -0°36′ ± 45′ (approximately -0.6° ± 0.75°)
- Caster angle: 4°02′ ± 45′ (approximately 4.03° ± 0.75°)
- Toe-in angle (Total): 0°8′ ± 15′ (approximately 0.13° ± 0.25° or 1.4 mm ± 2.7 mm)
- Kingpin Inclination angle: 12°05′ ± 45′ (approximately 12.08° ± 0.75°)
Rear Wheel Alignment
- Camber angle: -1°15′ ± 45′ (approximately -1.25° ± 0.75°)
- Toe-in angle (Total): 0°25′ ± 20′ (approximately 0.42° ± 0.33° or 4.6 mm ± 3.6 mm)
Tyre Pressure (Cold)
- Front Wheels: 230kPa / 2.3bar / 34psi
- Rear Wheels: 230kPa / 2.3bar / 34psi
Wheels and Tyres
- Wheel size: 7J×17
- Tyre size: 215/55 R17 94V
Proper wheel alignment is crucial for the MG ZS to ensure optimal handling, tire wear, and fuel efficiency. Regular checks and adjustments of these alignment parameters can significantly improve your vehicle’s performance and safety.<>
Remember that these specifications are for the unladen condition, meaning the vehicle should be empty when measurements are taken. Always consult with a professional technician or refer to the latest MG ZS service manual for the most accurate and up-to-date alignment procedures and specifications.<>
Source: https://www.mg.co.uk/sites/default/files/2021-11/MG%20ZS%20Owner%20Manual.pdf<>